Brian Mann

Publications

  • Lipp, GM; Mann, BP, Dynamics of an eccentric disk on a curved surface, Physica D: Nonlinear Phenomena, vol 266 (2014), pp. 34-41 [abs].
  • Tweten, DJ; Mann, BP, Experimental investigation of colored noise in stochastic resonance of a bistable beam, Physica D: Nonlinear Phenomena, vol 268 (2014), pp. 25-33 [abs].
  • Khasawneh, FA; Mann, BP, A spectral element approach for the stability analysis of time-periodic delay equations with multiple delays, Communications in Nonlinear Science and Numerical Simulation, vol 18 no. 8 (2013), pp. 2129-2141 [10.1016/j.cnsns.2012.11.030] [abs].
  • Tweten, DJ; Mann, BP, On the use of weighting matrices to improve harmonic balance parameter identification results, Journal of Sound and Vibration, vol 332 no. 12 (2013), pp. 2941-2953 [10.1016/j.jsv.2013.01.010] [abs].
  • Bobrenkov, OA; Butcher, EA; Mann, BP, Application of the Liapunov-Floquet transformation to differential equations with time delay and periodic coefficients, Journal of Vibration and Control, vol 19 no. 4 (2013), pp. 521-537 [10.1177/1077546311433914] [abs].
  • Bernard, BP; Owens, BAM; Mann, BP, Uncertainty propagation in the band gap structure of a 1D array of magnetically coupled oscillators, Journal of Vibration and Acoustics: Transactions of the ASME, vol 135 no. 4 (2013) [10.1115/1.4023821] [abs].
  • Sah, SM; McGehee, CC; Mann, BP, Dynamics of a horizontal pendulum driven by high-frequency rocking, Journal of Sound and Vibration (2013) [10.1016/j.jsv.2013.07.015] [abs].
  • Sah, SM; McGehee, CC; Mann, BP, Dynamics of a horizontal pendulum driven by high-frequency rocking, Journal of Sound and Vibration, vol 332 no. 24 (2013), pp. 6505-6518 [10.1016/j.jsv.2013.07.015] [abs].
  • Ballard, Z; Mann, BP, Two-dimensional nonlinear analysis of an untethered spherical buoy due to wave loading, Journal of Computational and Nonlinear Dynamics, vol 8 no. 4 (2013) [abs].
  • Bernard, BP; Mann, BP, Passive band-gap reconfiguration born from bifurcation asymmetry, Physical Review E: Statistical, Nonlinear, and Soft Matter Physics, vol 88 no. 5 (2013) [abs].
  • Sah, SM; Mann, B, Transition curves in a parametrically excited pendulum with a force of elliptic type, Proceedings of the Royal Society of London: Mathematical, Physical and Engineering Sciences, vol 468 no. 2148 (2012), pp. 3995-4007 [10.1098/rspa.2012.0328] [abs].
  • Butcher Eric, A; Mann Brian, P, Analytic Bounds for Instability Regions in Periodic Systems With Delay via Meissner's Equation, Journal of Computational and Nonlinear Dynamics, vol 7 no. 1 (2012) [10.1115/1.4004468] [abs].
  • Stanton, SC; Erturk, A; Mann, BP; Dowell, EH; Inman, DJ, Nonlinear nonconservative behavior and modeling of piezoelectric energy harvesters including proof mass effects, Journal of Intelligent Material Systems and Structures, vol 23 no. 2 (2012), pp. 183-199 [10.1177/1045389X11432656] [abs].
  • Tweten, DJ; Mann, BP, Spectral element method and the delayed feedback control of chaos, Physical Review E: Statistical, Nonlinear, and Soft Matter Physics, vol 86 no. 4 (2012) [10.1103/PhysRevE.86.046214] [abs].
  • Sah, SM; Mann, BP, Potential well metamorphosis of a pivoting fluid-filled container, Physica D: Nonlinear Phenomena, vol 241 no. 19 (2012), pp. 1660-1669 [10.1016/j.physd.2012.07.001] [abs].
  • Barton, DAW; Mann, BP; Burrow, SG, Control-based continuation for investigating nonlinear experiments, Journal of Vibration and Control, vol 18 no. 4 (2012), pp. 509-520 [10.1177/1077546310384004] [abs].
  • Stanton, SC; Owens, BAM; Mann, BP, Harmonic balance analysis of the bistable piezoelectric inertial generator, Journal of Sound and Vibration, vol 331 no. 15 (2012), pp. 3617-3627 [10.1016/j.jsv.2012.03.012] [abs].
  • Tweten, DJ; Lipp, GM; Khasawneh, FA; Mann, BP, On the comparison of semi-analytical methods for the stability analysis of delay differential equations, Journal of Sound and Vibration, vol 331 no. 17 (2012), pp. 4057-4071 [10.1016/j.jsv.2012.04.009] [abs].
  • Sah, SM; Mann, BP, Potential well metamorphosis of a pivoting fluid-filled container, Physica D: Nonlinear Phenomena (2012) [10.1016/j.physd.2012.07.001] [abs].
  • Khasawneh, FA; Bobrenkov, OA; Mann, BP; Butcher, EA, Investigation of period-doubling islands in milling with simultaneously engaged helical flutes, Journal of Vibration and Acoustics: Transactions of the ASME, vol 134 no. 2 (2012) [10.1115/1.4005022] [abs].
  • Khasawneh, FA; Barton, DAW; Mann, BP, Periodic solutions of nonlinear delay differential equations using spectral element method, Nonlinear Dynamics, vol 67 no. 1 (2012), pp. 641-658 [10.1007/s11071-011-0017-3] [abs].
  • McGehee, CC; Sah, SM; Mann, BP, Refining the method of averaging for a more accurate analytical approximation to the behaviors of a damped pendulum, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2012), pp. 465-469 [10.1115/DETC2012-70202] [abs].
  • Owens, BAM; Mann, BP, Fractal boundary explorations for a nonlinear two degree-of-freedom system, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2012), pp. 507-511 [10.1115/DETC2012-70327] [abs].
  • Tweten, DJ; Mann, BP, Parameter identification of a nonlinear beam energy harvester, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2012), pp. 1105-1114 [10.1115/DETC2012-70190] [abs].
  • Bernard, BP; Peyser, JW; Mann, BP; Arnold, DP, Using the mass ratio to induce band gaps in a 1d array of nonlinearly coupled oscillators, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2012), pp. 1155-1159 [10.1115/DETC2012-70403] [abs].
  • Sah, SM; McGehee, C; Mann, BP, Dynamics of a rocking horizontal pendulum under high frequency excitation, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2012), pp. 1045-1052 [10.1115/DETC2012-70877] [abs].
  • Lipp, GM; Mann, BP, Potential well escape of an eccentric disk, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol 4 no. PARTS A AND B (2012), pp. 871-878 [abs].
  • Owens, BAM; Stanton, SC; Mann, BP, Analysis of the bistable piezoelectric inertial generator by the harmonic balance method, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol 4 no. PARTS A AND B (2012), pp. 1159-1166 [abs].
  • Ballard, Z; Mann, BP, Experimental study of human walking to running dynamics with applications to energy harvesting, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol 4 no. PARTS A AND B (2012), pp. 557-563 [abs].
  • Mann, BP; Barton, DAW; Owens, BAM, Uncertainty in performance for linear and nonlinear energy harvesting strategies, Journal of Intelligent Material Systems and Structures, vol 23 no. 13 (2012), pp. 1451-1460 [10.1177/1045389X12439639] [abs].
  • Stanton, SC; Mann, BP; Owens, BAM, Melnikov theoretic methods for characterizing the dynamics of the bistable piezoelectric inertial generator in complex spectral environments, Physica D: Nonlinear Phenomena, vol 241 no. 6 (2012), pp. 711-720 [10.1016/j.physd.2011.12.010] [abs].
  • Owens, BAM; Mann, BP, Linear and nonlinear electromagnetic coupling models in vibration-based energy harvesting, Journal of Sound and Vibration, vol 331 no. 4 (2012), pp. 922-937 [10.1016/j.jsv.2011.10.026] [abs].
  • Sneller, AJ; Cette, P; Mann, BP, Experimental investigation of a post-buckled piezoelectric beam with an attached central mass used to harvest energy, Proceedings of the Institution of Mechanical Engineers Part I: Journal of Systems and Control Engineering, vol 225 no. 4 (2011), pp. 497-509 [10.1177/0959651811401954] [abs].
  • Mann, BP; Khasawneh, FA; Fales, R, Using information to generate derivative coordinates from noisy time series, Communications in Nonlinear Science and Numerical Simulation, vol 16 no. 8 (2011), pp. 2999-3004 [10.1016/j.cnsns.2010.11.011] [abs].
  • Khasawneh, FA; Mann, BP, Stability of delay integro-differential equations using a spectral element method, Mathematical and Computer Modelling, vol 54 no. 9-10 (2011), pp. 2493-2503 [10.1016/j.mcm.2011.06.009] [abs].
  • Khasawneh, FA; Mann, BP, A spectral element approach for the stability of delay systems, International Journal for Numerical Methods in Engineering, vol 87 no. 6 (2011), pp. 566-592 [10.1002/nme.3122] [abs].
  • Dunnmon, JA; Stanton, SC; Mann, BP; Dowell, EH, Aeroelastic limit cycles as a small scale energy source, Proceedings of the ASME Design Engineering Technical Conference, vol 4 no. PARTS A AND B (2011), pp. 1181-1190 [10.1115/DETC2011-47002] [abs].
  • Khasawneh, FA; Mann, BP; Butcher, EA, A multi-interval Chebyshev collocation approach for the stability of periodic delay systems with discontinuities, Communications in Nonlinear Science and Numerical Simulation, vol 16 no. 11 (2011), pp. 4408-4421 [10.1016/j.cnsns.2011.03.025] [abs].
  • Tweten, DJ; Lipp, GM; Khasawneh, FA; Mann, BP, Comparative study of semi-analytical methods for the stability analysis of delay differential equations, Proceedings of the ASME Design Engineering Technical Conference, vol 4 no. PARTS A AND B (2011), pp. 447-456 [10.1115/DETC2011-47519] [abs].
  • McGehee, CC; Ballard, ZC; Mann, BP, Horizontal pendulum with sudden changes in platform tilt, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2011), pp. 439-448 [10.1115/DETC2011-48423] [abs].
  • Owens, BAM; Mann, BP, Comparison of linear and nonlinear electromagnetic coupling models for a linear oscillator, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2011), pp. 229-237 [10.1115/DETC2011-47782] [abs].
  • Sah, SM; Mann, BP, Stability of a pivoting fluid-filled container, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2011), pp. 747-754 [10.1115/DETC2011-47997] [abs].
  • Ballard, Z; Mann, B, Experimental and numerical investigations of an untethered, nonlinear spherical buoy in a wave tank, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2011), pp. 429-437 [10.1115/DETC2011-48401] [abs].
  • McGehee, CC; Ballard, ZC; Mann, BP, Potential well shaping through the use of impact barriers for broadband electroelastic energy harvesting, ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011, vol 2 (2011), pp. 73-78 [abs].
  • Sneller, AJ; Owens, BA; Mann, BP, Experimental investigations of a bistable energy harvester, Conference Proceedings of the Society for Experimental Mechanics Series, vol 1 (2011), pp. 211-217 [abs].
  • Dunnmon, JA; Stanton, SC; Mann, BP; Dowell, EH, Power extraction from aeroelastic limit cycle oscillations, Journal of Fluids and Structures, vol 27 no. 8 (2011), pp. 1182-1198 [10.1016/j.jfluidstructs.2011.02.003] [abs].
  • Bhattacharyya, A; Schueller, JK; Mann, BP; Ziegert, JC; Schmitz, TL; Taylor, FJ; Fitz-Coy, NG, A closed form mechanistic cutting force model for helical peripheral milling of ductile metallic alloys, International Journal of Machine Tools and Manufacture, vol 50 no. 6 (2010), pp. 538-551 [10.1016/j.ijmachtools.2010.03.003] [abs].
  • Mann, BP; Patel, BR, Stability of delay equations written as state space models, Journal of Vibration and Control, vol 16 no. 7-8 (2010), pp. 1067-1085 [10.1177/1077546309341111] [abs].
  • Stanton, SC; Mann, BP, On the dynamic response of beams with multiple geometric or material discontinuities, Mechanical Systems and Signal Processing, vol 24 no. 5 (2010), pp. 1409-1419 [10.1016/j.ymssp.2009.11.009] [abs].
  • Mann, BP; Sims, ND, On the performance and resonant frequency of electromagnetic induction energy harvesters, Journal of Sound and Vibration, vol 329 no. 9 (2010), pp. 1348-1361 [10.1016/j.jsv.2009.11.008] [abs].
  • Sneller, AJ; Mann, BP, On the nonlinear electromagnetic coupling between a coil and an oscillating magnet, Journal of Physics D: Applied Physics, vol 43 no. 29 (2010) [10.1088/0022-3727/43/29/295005] [abs].
  • Sims, ND; Manson, G; Mann, B, Fuzzy stability analysis of regenerative chatter in milling, Journal of Sound and Vibration, vol 329 no. 8 (2010), pp. 1025-1041 [10.1016/j.jsv.2009.10.024] [abs].
  • Khasawneh, FA; Mann, BP; Butcher, EA, Comparison between collocation methods and spectral element approach for the stability of periodic delay systems ?, IFAC Proceedings Volumes (IFAC-PapersOnline) no. PART 1 (2010), pp. 69-74 [abs].
  • Stanton, SC; Mann, BP, Engaging nonlinearity for enhanced vibratory energy harvesting, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (2010) [abs].
  • Cette, P; Sneller, AJ; Mann, BP, Investigations of natural frequencies and vibration mode shapes for a post-buckled beam with different attached masses, ASME 2010 Dynamic Systems and Control Conference, DSCC2010, vol 2 (2010), pp. 569-576 [10.1115/DSCC2010-4025] [abs].
  • Stanton, SC; Mann, BP, Harvesting energy from the nonlinear oscillations of a bistable piezoelectric inertial energy generator, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009, vol 1 no. PART A (2010), pp. 447-456 [10.1115/DETC2009-86902] [abs].
  • Khasawneh, FA; Mann, BP; Bobrenkov, OA; Butcher, EA, Self-excited vibrations in a delay oscillator: Application to milling with simultaneously engaged helical flutes, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009, vol 1 no. PART B (2010), pp. 1387-1395 [10.1115/DETC2009-86636] [abs].
  • Radhakrishnan, A; Fales, R; Mann, B, Milling bifurcations: A numerical study, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009, vol 4 no. PART A (2010), pp. 645-652 [10.1115/DETC2009-86852] [abs].
  • Stanton, SC; Erturk, A; Mann, BP; Inman, DJ, Nonlinear piezoelectricity in electroelastic energy harvesters: Modeling and experimental identification, Journal of Applied Physics, vol 108 no. 7 (2010) [10.1063/1.3486519] [abs].
  • Stanton, SC; Erturk, A; Mann, BP; Inman, DJ, Resonant manifestation of intrinsic nonlinearity within electroelastic micropower generators, Applied Physics Letters, vol 97 no. 25 (2010) [10.1063/1.3530449] [abs].
  • Bobrenkov, OA; Khasawneh, FA; Butcher, EA; Mann, BP, Analysis of milling dynamics for simultaneously engaged cutting teeth, Journal of Sound and Vibration, vol 329 no. 5 (2010), pp. 585-606 [10.1016/j.jsv.2009.09.032] [abs].
  • Stanton, SC; McGehee, CC; Mann, BP, Nonlinear dynamics for broadband energy harvesting: Investigation of a bistable piezoelectric inertial generator, Physica D: Nonlinear Phenomena, vol 239 no. 10 (2010), pp. 640-653 [10.1016/j.physd.2010.01.019] [abs].
  • Mann, BP; Owens, BA, Investigations of a nonlinear energy harvester with a bistable potential well, Journal of Sound and Vibration, vol 329 no. 9 (2010), pp. 1215-1226 [10.1016/j.jsv.2009.11.034] [abs].
  • Stanton, SC; Erturk, A; Mann, BP; Inman, DJ, On the manifestation and influence of material nonlinearity in electroelastic power generators, ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, vol 1 (2010), pp. 261-266 [abs].
  • Kurdi, MH; Schmitz, TL; Haftka, RT; Mann, BP, Milling optimisation of removal rate and accuracy with uncertainty: Part 2: Parameter variation, International Journal of Materials and Product Technology, vol 35 no. 1-2 (2009), pp. 26-46 [10.1504/IJMPT.2009.025211] [abs].
  • Khasawneh, FA; Mann, BP; Insperger, T; Stépán, G, Increased stability of low-speed turning through a distributed force and continuous delay model, Journal of Computational and Nonlinear Dynamics, vol 4 no. 4 (2009), pp. 1-12 [10.1115/1.3187153] [abs].
  • Mann, BP; Khasawneh, FA, An energy-balance approach for oscillator parameter identification, Journal of Sound and Vibration, vol 321 no. 1-2 (2009), pp. 65-78 [10.1016/j.jsv.2008.09.036] [abs].
  • Kurdi, MH; Schmitz, TL; Haftka, RT; Mann, BP, Milling optimisation of removal rate and accuracy with uncertainty: Part 1: Parameter selection, International Journal of Materials and Product Technology, vol 35 no. 1-2 (2009), pp. 3-25 [10.1504/IJMPT.2009.025209] [abs].
  • Chicone, C; Felts, K; Mann, B, Observation and investigation of a non-monotonic period function for an impact oscillator, Communications in Nonlinear Science and Numerical Simulation, vol 14 no. 5 (2009), pp. 2415-2425 [10.1016/j.cnsns.2008.06.009] [abs].
  • Radhakrishnan, A; Fales, R; Mann, B, Milling bifurcations: A numerical study, Proceedings of the ASME Design Engineering Technical Conference, vol 4 no. PARTS A, B AND C (2009), pp. 645-652 [10.1115/DETC2009-86852] [abs].
  • Stanton, SC; Mann, BP, Harvesting energy from the nonlinear oscillations of a bistable piezoelectric inertial energy generator, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2009), pp. 447-456 [10.1115/DETC2009-86902] [abs].
  • Khasawneh, FA; Mann, BP; Bobrenkov, OA; Butcher, EA, Self-excited vibrations in a delay oscillator: Application to milling with simultaneously engaged helical flutes, Proceedings of the ASME Design Engineering Technical Conference, vol 1 no. PARTS A AND B (2009), pp. 1387-1395 [10.1115/DETC2009-86636] [abs].
  • Khasawneh, FA; Mann, BP; Insperger, T; Stépán, G, Explanation for low-speed stability increases in machining: Application of a continuous delay model, 2008 Proceedings of the ASME Dynamic Systems and Control Conference, DSCC 2008 no. PART A (2009), pp. 503-510 [abs].
  • Khasawneh, FA; Mann, BP; Patel, B, A state-space temporal finite element approach for stability investigations of delay equations, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2009, SMASIS2009, vol 1 (2009), pp. 415-423 [10.1115/SMASIS2009-1263] [abs].
  • Butcher, E; Mann, B, Stability analysis and control of linear periodic delayed systems using Chebyshev and temporal finite element methods, Delay Differential Equations: Recent Advances and New Directions (2009), pp. 93-129 [10.1007/978-0-387-85595-0_4] [abs].
  • Stanton, SC; McGehee, CC; Mann, BP, Reversible hysteresis for broadband magnetopiezoelastic energy harvesting, Applied Physics Letters, vol 95 no. 17 (2009) [10.1063/1.3253710] [abs].
  • Mann, BP; Sims, ND, Energy harvesting from the nonlinear oscillations of magnetic levitation, Journal of Sound and Vibration, vol 319 no. 1-2 (2009), pp. 515-530 [10.1016/j.jsv.2008.06.011] [abs].
  • Mann, BP, Energy criterion for potential well escapes in a bistable magnetic pendulum, Journal of Sound and Vibration, vol 323 no. 3-5 (2009), pp. 864-876 [10.1016/j.jsv.2009.01.012] [abs].
  • Patel, B; Mann, BP; Young, KA, Uncharted islands of chatter instability in milling, International Journal of Machine Tools and Manufacture, vol 48 no. 1-2 (2008), pp. 124-134 [abs].
  • Mann, BP; Edes, BT; Young, SJ; Easley, KA; Ma, K, Surface location error and chatter prediction for helical end mills, International Journal of Machine Tools and Manufacture, vol 317 no. 3-5 (2008), pp. 664-686 [abs].
  • Liu, J; Martin, DT; Kadirvel, K; Nishida, T; Catafesta, LN; Sheplak, M; Mann, BP, Harmonic balance nonlinear identification from steady state response of a dual backplate MEMS microphone, Journal of Microelectromechanical Systems, vol 117 no. 3 (2008), pp. 1358-1370 [abs].
  • Kurdi, MH; Haftka, RT; Schmitz, TL; Mann, BP, A robust semi-analytical method for calculating the response sensitivity of a time delay system, Journal of Vibration and Acoustics: Transactions of the ASME, vol 130 no. 6 (2008) [10.1115/1.2981093] [abs].
  • Insperger, T; Mann, BP; Surmann, T; Stépán, G, On the chatter frequencies of milling processes with runout, International Journal of Machine Tools and Manufacture, vol 48 no. 10 (2008), pp. 1081-1089 [10.1016/j.ijmachtools.2008.02.002] [abs].
  • Mann, BP; Edes, BT; Easley, SJ; Young, KA; Ma, K, Chatter vibration and surface location error prediction for helical end mills, International Journal of Machine Tools and Manufacture, vol 48 no. 3-4 (2008), pp. 350-361 [10.1016/j.ijmachtools.2007.10.003] [abs].
  • Liu, J; Martin, DT; Nishida, T; III, LNC; Sheplak, M; Mann, BP, Harmonic balance nonlinear identification of a capacitive dual-backplate MEMS microphone, IEEE Journal of Microelectromechanical Systems, vol 17 no. 3 (2008), pp. 698-708 [10.1109/JMEMS.2008.922067] [abs].
  • Mann, BP; Liu, J; Hazra, SS, Measurement nonlinearity interpreted as material behavior in dynamic nanoindentation, Journal of Sound and Vibration, vol 311 no. 3-5 (2008), pp. 1358-1370 [10.1016/j.jsv.2007.10.023] [abs].
  • Radhakrishnan, A; Edes, BT; Mann, BP, An experimental study of subcritical bifurcations in milling, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007, vol 1 PART A (2008), pp. 599-611 [10.1115/DETC2007-34808] [abs].
  • Sims, ND; Mann, B; Huyanan, S, Analytical prediction of chatter stability for variable pitch and variable helix milling tools, Journal of Sound and Vibration, vol 317 no. 3-5 (2008), pp. 664-686 [10.1016/j.jsv.2008.03.045] [abs].
  • Patel, BR; Mann, BP; Young, KA, Uncharted islands of chatter instability in milling, International Journal of Machine Tools and Manufacture, vol 48 no. 1 (2008), pp. 124-134 [10.1016/j.ijmachtools.2007.06.009] [abs].
  • Liu, J; Martin, DT; Kadirvel, K; Nishida, T; Cattafesta, L; Sheplak, M; Mann, BP, Nonlinear model and system identification of a capacitive dual-backplate MEMS microphone, Journal of Sound and Vibration, vol 309 no. 1-2 (2008), pp. 276-292 [10.1016/j.jsv.2007.07.037] [abs].
  • Garg, NK; Mann, BP; Kim, NH; Kurdi, MH, Stability of a time-delayed system with parametric excitation, Journal of Dynamic Systems Measurement and Control: Transactions of the ASME, vol 129 no. 2 (2007), pp. 125-135 [10.1115/1.2432357] [abs].
  • Mann, BP; Carter, RE; Hazra, SS, Experimental study of an impact oscillator with viscoelastic and Hertzian contact, Nonlinear Dynamics, vol 50 no. 3 (2007), pp. 587-596 [10.1007/s11071-006-9178-x] [abs].
  • Long, XH; Balachandran, B; Mann, BP, Dynamics of milling processes with variable time delay, Nonlinear Dynamics, vol 47 no. 4 (2007), pp. 49-63 [abs].
  • Long, XH; Balachandran, B; Mann, BP, Dynamics of milling processes with variable time delays, Nonlinear Dynamics, vol 47 no. 1-3 (2007), pp. 49-63 [10.1007/s11071-006-9058-4] [abs].
  • Insperger, T; Mann, BP; Surmann, T; Stepan, G, Identification of machine tool chatter for milling operations with runout, 14th International Congress on Sound and Vibration 2007, ICSV 2007, vol 2 (2007), pp. 1426-1433 [abs].
  • Mann, BP; Liu, J; Hazra, S, Correcting measurement nonlinearity in dynamic nanoindentation, AMD (Symposia Series) (American Society of Mechanical Engineers, Applied Mechanics Division) (2006) [10.1115/IMECE2006-15070] [abs].
  • Koplow, MA; Bhattacharyya, A; Mann, BP, Closed form solutions for the dynamic response of Euler-Bernoulli beams with step changes in cross section, Journal of Sound and Vibration, vol 295 no. 1-2 (2006), pp. 214-225 [10.1016/j.jsv.2006.01.008] [abs].
  • Mann, BP; Koplow, MA, Symmetry breaking bifurcations of a parametrically excited pendulum, Nonlinear Dynamics, vol 46 no. 4 (2006), pp. 427-437 [10.1007/s11071-006-9033-0] [abs].
  • Schmitz, TL; Mann, BP, Closed-form solutions for surface location error in milling, International Journal of Machine Tools and Manufacture, vol 46 no. 12-13 (2006), pp. 1369-1377 [10.1016/j.ijmachtools.2005.10.007] [abs].
  • Mann, BP; Young, KA, An empirical approach for delayed oscillator stability and parametric identification, Proceedings of the Royal Society of London: Mathematical, Physical and Engineering Sciences, vol 462 no. 2071 (2006), pp. 2145-2160 [10.1098/rspa.2006.1677] [abs].
  • Mann, BP; Liu, J; Hazra, S, Correcting measurement nonlinearity in dynamic nanoindentation, AMD (Symposia Series) (American Society of Mechanical Engineers, Applied Mechanics Division) (2006) [abs].
  • Mann, BP; Young, KA; Schmitz, TL; Dilley, DN, Simultaneous stability and surface location error predictions in milling, Journal of Manufacturing Science and Engineering, vol 127 no. 3 (2005), pp. 446-453 [10.1115/1.1948394] [abs].
  • Stepan, G; Szalai, R; Mann, BP; Bayly, PV; Insperger, T; Gradisek, J; Govekar, E, Nonlinear dynamics of high-speed milling - Analyses, numerics, and experiments, Journal of Vibration and Acoustics, Transactions of the ASME, vol 127 no. 2 (2005), pp. 197-203 [10.1115/1.1891818] [abs].
  • Mann, BP; Garg, NK; Young, KA; Helvey, AM, Milling bifurcations from structural asymmetry and nonlinear regeneration, Nonlinear Dynamics, vol 42 no. 4 (2005), pp. 319-337 [10.1007/s11071-005-5719-y] [abs].
  • Kurdi, MH; Haftka, RT; Schmitz, TL; Mann, BP, A numerical study of uncertainty in stability and surface location in high-speed milling, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, vol 16-1 (2005), pp. 387-395 [10.1115/IMECE2005-80875] [abs].
  • Liu, J; Martin, DT; Kadirvel, K; Nishida, T; Cattafesta, LN; Sheplak, M; Mann, BP, Nonlinear system identification of a MEMS dual-backplate capacitive microphone by harmonic balance method, AMD (Symposia Series) (American Society of Mechanical Engineers, Applied Mechanics Division), vol 256 (2005), pp. 269-276 [10.1115/IMECE2005-82880] [abs].
  • Mann, BP; Helvey, AM; Young, KA; Zapata, RE, Experimental parameter identification of a time delayed system, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005, vol 6 B (2005), pp. 803-810 [abs].
  • Koplow, MA; Mann, BP, Bifurcations of a planar pendulum driven at a tilted angle, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005, vol 6 B (2005), pp. 1111-1121 [abs].
  • Schmitz, TL; Mann, BP, Analytical solutions to surface location error in milling, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005, vol 1 A (2005), pp. 315-322 [abs].
  • Liu, J; Martin, DT; Kadirvel, K; Nishida, T; Sheplak, M; Mann, BP, Nonlinear identification of a capacitive dual-backplate MEMS microphone, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005, vol 1 A (2005), pp. 441-451 [abs].
  • Mann, BP; Liu, J, Nonlinear behavior in dynamic nanoindentation, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005 (2005) [abs].
  • Mann, BP; Bayly, PV; Davies, MA; Halley, JE, Limit cycles, bifurcations, and accuracy of the milling process, Journal of Sound and Vibration, vol 277 no. 1-2 (2004), pp. 31-48 [10.1016/j.jsv.2003.08.040] [abs].
  • Bartow, MJ; Bayly, PV; Mann, BP, Fiber Bragg grating sensors for measurement of tool displacement, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, vol 15 (2004), pp. 941-946 [10.1115/IMECE2004-59210] [abs].
  • Mann, BP; Dilley, DN, Influence of process dynamics on traditionally machined surfaces introduction, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, vol 15 (2004) [abs].
  • Kurdi, MH; Haftka, RT; Schmitz, TL; Mann, BP, Simultaneous optimization of removal rate and part accuracy in high-speed milling, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, vol 15 (2004), pp. 1001-1009 [10.1115/IMECE2004-60231] [abs].
  • Insperger, T; Stépán, G; Bayly, PV; Mann, BP, Multiple chatter frequencies in milling processes, Journal of Sound and Vibration, vol 262 no. 2 (2003), pp. 333-345 [10.1016/S0022-460X(02)01131-8] [abs].
  • Bayly, PV; Halley, JE; Mann, BP; Davies, MA, Stability of interrupted cutting by temporal finite element analysis, Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol 125 no. 2 (2003), pp. 220-225 [10.1115/1.1556860] [abs].
  • Mann, BP; Insperger, T; Bayly, PV; Stépán, G, Stability of up-milling and down-milling, Part 2: Experimental verification, International Journal of Machine Tools and Manufacture, vol 43 no. 1 (2003), pp. 35-40 [10.1016/S0890-6955(02)00160-8] [abs].
  • Stepan, G; Szalai, R; Mann, BP; Bayly, PV; Insperger, T; Gradisek, J; Govekar, E, Global attractors of high-speed milling - Analyses, numerics and experiments, Proceedings of the ASME Design Engineering Technical Conference, vol 5 C (2003), pp. 2231-2238 [abs].
  • Mann, BP; Bartow, MJ; Young, KA; Bayly, PV; Schmitz, TL, Machining accuracy due to tool or workpiece vibrations, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, vol 14 (2003), pp. 55-62 [10.1115/IMECE2003-41991] [abs].
  • Insperger, T; Mann, BP; Stépán, G; Bayly, PV, Stability of up-milling and down-milling, Part 1: Alternative analytical methods, International Journal of Machine Tools and Manufacture, vol 43 no. 1 (2003), pp. 25-34 [10.1016/S0890-6955(02)00159-1] [abs].
  • Bayly, PV; Mann, BP; Schmitz, TL; Peters, DA; Stepan, G; Insperger, T, Effects of radial immersion and cutting direction on chatter instability in end-milling, ASME International Mechanical Engineering Congress and Exposition, Proceedings (2002), pp. 351-363 [10.1115/IMECE2002-39116] [abs].
  • Bayly, PV; Schmitz, TL; Stepan, G; Mann, BP; Peters, DA; Insperger, T, Effects of radial immersion and cutting direction on chatter instability in end-milling, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, vol 13 (2002), pp. 351-363 [10.1115/IMECE2002-39116] [abs].
  • Bayly, PV; Mann, BP; Halley, JE; Davies, MA, Stability of interrupted cutting by temporal finite element analysis, Proceedings of the ASME Design Engineering Technical Conference, vol 6 C (2001), pp. 2361-2370 [abs].