Adrian Bejan

Publications

  • Cetkin, E; Lorente, S; Bejan, A, Vascularization for cooling and reduced thermal stresses, International Journal of Heat and Mass Transfer, vol 80 (2015), pp. 858-864 [10.1016/j.ijheatmasstransfer.2014.09.027] [abs].
  • Bejan, A; Lorente, S; Kang, D-H, Constructal design of thermoelectric power packages, International Journal of Heat and Mass Transfer, vol 79 (2014), pp. 291-299 [10.1016/j.ijheatmasstransfer.2014.08.008] [abs].
  • Alalaimi, M; Lorente, S; Bejan, A, Thermal coupling between a spiral pipe and a conducting volume, International Journal of Heat and Mass Transfer, vol 77 (2014), pp. 202-207 [10.1016/j.ijheatmasstransfer.2014.04.070] [abs].
  • Kobayashi, H; Maeno, T; Lorente, S; Bejan, A, Double tree structure in a conducting body, International Journal of Heat and Mass Transfer, vol 77 (2014), pp. 140-146 [10.1016/j.ijheatmasstransfer.2014.04.072] [abs].
  • Bejan, A; Ziaei, S; Lorente, S,
    The S curve of energy storage by melting
    , Journal of Applied Physics, vol 116 no. 11 (2014), pp. 114902-114902 [10.1063/1.4894869] [abs].
  • Errera, MR; Lorente, S; Bejan, A, Assemblies of heat pumps served by a single underground heat exchanger, International Journal of Heat and Mass Transfer, vol 75 (2014), pp. 327-336 [10.1016/j.ijheatmasstransfer.2014.03.039] [abs].
  • Bejan, A; Charles, JD; Lorente, S,
    The evolution of airplanes
    , Journal of Applied Physics, vol 116 no. 4 (2014), pp. 044901-044901 [10.1063/1.4886855] [abs].
  • Bejan, A; Lorente, S; Kim, Y; Lee, J, Power from a hot gas stream with superheater and reheater in parallel, International Journal of Heat and Mass Transfer, vol 73 (2014), pp. 29-32 [10.1016/j.ijheatmasstransfer.2014.01.049] [abs].
  • Rocha, LAO; Lorente, S; Bejan, A,
    Vascular design for reducing hot spots and stresses
    , Journal of Applied Physics, vol 115 no. 17 (2014), pp. 174904-174904 [10.1063/1.4874220] [abs].
  • Lorente, S; Bejan, A; Niu, JL,
    Phase change heat storage in an enclosure with vertical pipe in the center
    , International Journal of Heat and Mass Transfer, vol 72 (2014), pp. 329-335 [10.1016/j.ijheatmasstransfer.2014.01.021] [abs].
  • Pan, Y; Lorente, S; Bejan, A; Xia, L; Deng, S, Distribution of size in multi-evaporator air conditioning systems, International Journal of Energy Research, vol 38 no. 5 (2014), pp. 652-657 [10.1002/er.3072] [abs].
  • Bejan, A, “Entransy,” and Its Lack of Content in Physics, Journal of Heat Transfer: Transactions of the ASME, vol 136 no. 5 (2014), pp. 055501-055501 [10.1115/1.4026527] [abs].
  • Bejan, A; Ziaei, S; Lorente, S, Evolution: why all plumes and jets evolve to round cross sections., Scientific Reports, vol 4 (2014) [10.1038/srep04730] [abs].
  • Bejan, A, Maxwell's demons everywhere: evolving design as the arrow of time., Scientific Reports, vol 4 (2014) [10.1038/srep04017] [abs].
  • Bejan, A, Culture and the Constructal-Law evolution of the human and machine species: comment on "An evolutionary framework for cultural change: selectionism versus communal exchange" by L. Gabora., Physics of Life Reviews, vol 10 no. 2 (2013), pp. 151-153 [10.1016/j.plrev.2013.04.008] [abs].
  • Bejan, A, Constructal law: pleasure, golden ratio, animal locomotion and the design of pedestrian evacuation: comment on "The emergence of design in pedestrian dynamics: locomotion, self-organization, walking paths and the constructal law" by A. Miguel., Physics of Life Reviews, vol 10 no. 2 (2013), pp. 199-201 [10.1016/j.plrev.2013.04.010] [abs].
  • Cetkin, E; Lorente, S; Bejan, A, Constructal paddle design with "fingers", Journal of Applied Physics, vol 113 no. 19 (2013) [10.1063/1.4804961] [abs].
  • Bejan, A; Lorente, S, Constructal law of design and evolution: Physics, biology, technology, and society, Journal of Applied Physics, vol 113 no. 15 (2013) [10.1063/1.4798429] [abs].
  • Bejan, A, Convection Heat Transfer: Fourth Edition, Convection Heat Transfer: Fourth Edition (2013) [10.1002/9781118671627] [abs].
  • Bejan, A, Entropy Generation Minimization, Exergy Analysis, and the Constructal Law, Arabian Journal for Science and Engineering Section B: Engineering, vol 38 no. 2 (2013), pp. 329-340 [10.1007/s13369-012-0444-6] [abs].
  • Sahin, AZ; Mokheimer, EM; Bahaidarah, HM; Antar, MA; Gandhidasan, P; Ben-Mansour, R; Al-Dini, S; Rehman, S; Bejan, A; Al-Nimr, MA; Oztop, HF; Chen, L; Midilli, A; Lawrence, J, Special Issue: Thermodynamic Optimization, Exergy Analysis, and Constructal Design, Arabian Journal for Science and Engineering Section B: Engineering, vol 38 no. 2 (2013), pp. 219-219 [10.1007/s13369-012-0519-4] [abs].
  • Lui, CH; Fong, NK; Lorente, S; Bejan, A; Chow, WK, Constructal design of pedestrian evacuation from an area, Journal of Applied Physics, vol 113 no. 3 (2013) [10.1063/1.4780612] [abs].
  • Alalaimi, M; Lorente, S; Anderson, R; Bejan, A, Effect of size on ground-coupled heat pump performance, International Journal of Heat and Mass Transfer, vol 64 (2013), pp. 115-121 [10.1016/j.ijheatmasstransfer.2013.04.034] [abs].
  • Bejan, A; Lorente, S; Kang, DH, Constructal design of regenerators, International Journal of Energy Research, vol 37 no. 12 (2013), pp. 1509-1518 [10.1002/er.2960] [abs].
  • Bejan, A; Lorente, S; Royce, J; Faurie, D; Parran, T; Black, M; Ash, B, The constructal evolution of sports with throwing motion: Baseball, golf, hockey and boxing, International Journal of Design, Nature and Ecodynamics, vol 8 no. 1 (2013), pp. 1-16 [10.2495/DNE-V8-N1-1-16] [abs].
  • Bejan, A; Lorente, S; Yilbas, BS; Sahin, AZ, Why solidification has an S-shaped history., Scientific Reports, vol 3 (2013) [10.1038/srep01711] [abs].
  • Bejan, A; Lorente, S, The Constructal Design of Humanity on the Globe, Understanding complex systems (2013), pp. 1-20 [10.1007/978-1-4614-5049-8_1] [abs].
  • Bejan, A, Technology Evolution, from the Constructal Law, Advances in Heat Transfer, vol 45 (2013), pp. 183-207 [10.1016/B978-0-12-407819-2.00003-7] [abs].
  • Bejan, A, Culture and the Constructal-Law evolution of the human and machine species. Comment on "An evolutionary framework for cultural change: Selectionism versus communal exchange" by L. Gabora, Physics of Life Reviews, vol 10 no. 2 (2013), pp. 151-153 [10.1016/j.plrev.2013.04.008] [abs].
  • Bejan, A, Constructal law: Pleasure, golden ratio, animal locomotion and the design of pedestrian evacuation. Comment on "The emergence of design in pedestrian dynamics: Locomotion, self-organization, walking paths and the constructal law" by A. Miguel, Physics of Life Reviews, vol 10 no. 2 (2013), pp. 199-201 [10.1016/j.plrev.2013.04.010] [abs].
  • Bello-Ochende, T; Olakoyejo, OT; Meyer, JP; Bejan, A; Lorente, S, Constructal flow orientation in conjugate cooling channels with internal heat generation, International Journal of Heat and Mass Transfer, vol 57 no. 1 (2013), pp. 241-249 [10.1016/j.ijheatmasstransfer.2012.10.021] [abs].
  • Charles, JD; Bejan, A, The evolution of long distance running and swimming, International Journal of Design, Nature and Ecodynamics, vol 8 no. 1 (2013), pp. 17-28 [10.2495/DNE-V8-N1-17-28] [abs].
  • Errera, MR; Lorente, S; Anderson, R; Bejan, A, One underground heat exchanger for multiple heat pumps, International Journal of Heat and Mass Transfer, vol 65 (2013), pp. 727-738 [10.1016/j.ijheatmasstransfer.2013.06.027] [abs].
  • Kang, DH; Lorente, S; Bejan, A, Constructal distribution of multi-layer insulation, International Journal of Energy Research, vol 37 no. 2 (2013), pp. 153-160 [10.1002/er.1895] [abs].
  • Kobayashi, H; Lorente, S; Anderson, R; Bejan, A, Trees and serpentines in a conducting body, International Journal of Heat and Mass Transfer, vol 56 no. 1-2 (2013), pp. 488-494 [10.1016/j.ijheatmasstransfer.2012.09.012] [abs].
  • Kobayashi, H; Lorente, S; Anderson, R; Bejan, A, Underground heat flow patterns for dense neighborhoods with heat pumps, International Journal of Heat and Mass Transfer, vol 62 no. 1 (2013), pp. 632-637 [10.1016/j.ijheatmasstransfer.2013.03.030] [abs].
  • Lee, J; Kim, Y; Lorente, S; Bejan, A, Constructal design of a comb-like channel network for self-healing and self-cooling, International Journal of Heat and Mass Transfer, vol 66 (2013), pp. 898-905 [10.1016/j.ijheatmasstransfer.2013.07.070] [abs].
  • Lorente, S; Lee, J; Kim, Y; Bejan, A, Power from a hot gas stream with multiple superheaters and reheaters, International Journal of Heat and Mass Transfer, vol 67 (2013), pp. 153-158 [10.1016/j.ijheatmasstransfer.2013.07.048] [abs].
  • Ma, H; Anderson, M; Ayyaswamy, PS; Bejan, A; Bayazitoglu, Y; Chen, G; Cheng, P; Dhir, VK; Dickey, JT; Faghri, A; Howell, JR; Jaluria, Y; Jensen, M; Kandlikar, SG; Li, C; Niznik, B; Mikic, BB; Minkowycz, WJ; Moffat, RJ; Ochterbeck, J; Simon, T, Professor Bud Peterson on his 60th birthday, International Journal of Heat and Mass Transfer, vol 58 no. 1 (2013), pp. 3-5 [10.1016/j.ijheatmasstransfer.2012.10.074] [abs].
  • Pan, Y; Lorente, S; Bejan, A; Xia, L; Deng, S, Distribution of size in multi-evaporator air conditioning systems, International Journal of Energy Research (2013) [10.1002/er.3072] [abs].
  • Lorente, S; Cetkin, E; Bello-Ochende, T; Meyer, JP; Bejan, A, The constructal-law physics of why swimmers must spread their fingers and toes., Journal of Theoretical Biology, vol 308 (2012), pp. 141-146 [10.1016/j.jtbi.2012.05.033] [abs].
  • Bejan, A; Zane, JP, Design in Nature, Mechanical Engineering, vol 134 no. 6 (2012), pp. 42-47 [abs].
  • Bejan, A; Lorente, S, THE S-CURVES ARE EVERYWHERE, Mechanical Engineering, vol 134 no. 5 (2012), pp. 44-47 [abs].
  • Bejan, A; Haynsworth, P, The natural design of hierarchy: Basketball versus academics, International Journal of Design, Nature and Ecodynamics, vol 7 no. 1 (2012), pp. 14-26 [10.2495/DNE-V7-N1-14-26] [abs].
  • Bejan, A; Lorente, S; Kang, DH, Constructal design of regenerators, International Journal of Energy Research (2012) [10.1002/er.2960] [abs].
  • Bejan, A; Lorente, S, X.-B. Liu, Q. Chen, M. Wang, N. Pan and Z.-Y. Guo, Multi-dimensional effect on optimal network structure for fluid distribution, Chemical Engineering and Processing 49 (2010) 1038-1043, Chemical Engineering and Processing: process intensification, vol 56 (2012) [10.1016/j.cep.2012.02.007] [abs].
  • Bejan, A; Lorente, S, The physics of spreading ideas, International Journal of Heat and Mass Transfer, vol 55 no. 4 (2012), pp. 802-807 [10.1016/j.ijheatmasstransfer.2011.10.029] [abs].
  • Bejan, A, Why we want power: Economics is physics, International Journal of Heat and Mass Transfer, vol 55 no. 19-20 (2012), pp. 4929-4935 [10.1016/j.ijheatmasstransfer.2012.05.046] [abs].
  • Bejan, A, Why the bigger live longer and travel farther: animals, vehicles, rivers and the winds., Scientific Reports, vol 2 (2012) [10.1038/srep00594] [abs].
  • Cetkin, E; Lorente, S; Bejan, A, Vascularization for cooling a plate heated by a randomly moving source, Journal of Applied Physics, vol 112 no. 8 (2012) [10.1063/1.4759290] [abs].
  • Cetkin, E; Lorente, S; Bejan, A, The steepest S curve of spreading and collecting flows: Discovering the invading tree, not assuming it, Journal of Applied Physics, vol 111 no. 11 (2012) [10.1063/1.4721657] [abs].
  • Cetkin, E; Lorente, S; Bejan, A, The steepest S curve of spreading and collecting flows: Discovering the invading tree, not assuming it, Journal of Applied Physics, vol 111 no. 10 (2012) [10.1063/1.4721657] [abs].
  • Clausse, M; Meunier, F; Reis, AH; Bejan, A, Climate change, in the framework of the constructal law, International Journal of Global Warming, vol 4 no. 3-4 (2012), pp. 242-260 [abs].
  • Combelles, L; Lorente, S; Anderson, R; Bejan, A, Tree-shaped fluid flow and heat storage in a conducting solid, Journal of Applied Physics, vol 111 no. 1 (2012) [10.1063/1.3671672] [abs].
  • Kobayashi, H; Lorente, S; Anderson, R; Bejan, A, Freely morphing tree structures in a conducting body, International Journal of Heat and Mass Transfer, vol 55 no. 17-18 (2012), pp. 4744-4753 [10.1016/j.ijheatmasstransfer.2012.04.038] [abs].
  • Kobayashi, H; Lorente, S; Anderson, R; Bejan, A, Serpentine thermal coupling between a stream and a conducting body, Journal of Applied Physics, vol 111 no. 4 (2012) [10.1063/1.3689152] [abs].
  • Lorente, S; Bejan, A; Al-Hinai, K; Sahin, AZ; Yilbas, BS, Constructal design of distributed energy systems: Solar power and water desalination, International Journal of Heat and Mass Transfer, vol 55 no. 9-10 (2012), pp. 2213-2218 [10.1016/j.ijheatmasstransfer.2012.01.020] [abs].
  • Lui, CH; Fong, NK; Lorente, S; Bejan, A; Chow, WK, Constructal design for pedestrian movement in living spaces: Evacuation configurations, Journal of Applied Physics, vol 111 no. 5 (2012) [10.1063/1.3689771] [abs].
  • Rocha, LAO; Lorente, S; Bejan, A; Anderson, R, Constructal design of underground heat sources or sinks for the annual cycle, International Journal of Heat and Mass Transfer, vol 55 no. 25-26 (2012), pp. 7832-7837 [10.1016/j.ijheatmasstransfer.2012.08.010] [abs].
  • Avedisian, CT; Bejan, A; Cao, Y; Dhir, V; Howell, JR; Incropera, FP; Minkowycz, WJ; Peterson, GP'; Viskanta, R; Zhang, Y, Professor Amir Faghri on his 60th birthday, International Journal of Heat and Mass Transfer, vol 54 no. 21-22 (2011), pp. 4459-4461 [10.1016/j.ijheatmasstransfer.2011.05.025] [abs].
  • Bejan, A; Lorente, S, The constructal law and the evolution of design in nature., Physics of Life Reviews, vol 8 no. 3 (2011), pp. 209-240 [10.1016/j.plrev.2011.05.010] [abs].
  • Bejan, A; Lorente, S; Yilbas, BS; Sahin, AZ, The effect of size on efficiency: Power plants and vascular designs, International Journal of Heat and Mass Transfer, vol 54 no. 7-8 (2011), pp. 1475-1481 [10.1016/j.ijheatmasstransfer.2010.11.045] [abs].
  • Bejan, A; Lorente, S, The constructal law makes biology and economics be like physics. Reply to comments on "The constructal law and the evolution of design in nature", Physics of Life Reviews, vol 8 no. 3 (2011), pp. 261-263 [10.1016/j.plrev.2011.08.001] [abs].
  • Bejan, A; Lorente, S, The constructal law origin of the logistics S curve, Journal of Applied Physics, vol 110 no. 2 (2011) [10.1063/1.3606555] [abs].
  • Bejan, A; Lorente, S, The constructal law and the design of the Biosphere: Nature and globalization, Journal of Heat Transfer: Transactions of the ASME, vol 133 no. 1 (2011) [10.1115/1.4002223] [abs].
  • Bejan, A, Stressing the science of engineering, Mechanical Engineering, vol 133 no. 10 (2011) [abs].
  • Bejan, A, Animals spinning their wheels, Mechanical Engineering, vol 133 no. 6 (2011) [abs].
  • Cetkin, E; Lorente, S; Bejan, A, Hybrid grid and tree structures for cooling and mechanical strength, Journal of Applied Physics, vol 110 no. 6 (2011) [10.1063/1.3626062] [abs].
  • Cetkin, E; Lorente, S; Bejan, A, Vascularization for cooling and mechanical strength, International Journal of Heat and Mass Transfer, vol 54 no. 13-14 (2011), pp. 2774-2781 [10.1016/j.ijheatmasstransfer.2011.02.061] [abs].
  • Jung, J; Lorente, S; Anderson, R; Bejan, A, Configuration of heat sources or sinks in a finite volume, Journal of Applied Physics, vol 110 no. 2 (2011) [10.1063/1.3610387] [abs].
  • Kim, Y; Lorente, S; Bejan, A, Steam generator structure: Continuous model and constructal design, International Journal of Energy Research, vol 35 no. 4 (2011), pp. 336-345 [10.1002/er.1694] [abs].
  • Xia, L; Lorente, S; Bejan, A, Constructal design of distributed cooling on the landscape, International Journal of Energy Research, vol 35 no. 9 (2011), pp. 805-812 [10.1002/er.1743] [abs].
  • Bejan, A, Design in nature, thermodynamics, and the constructal law: comment on "Life, hierarchy, and the thermodynamic machinery of planet Earth" by A. Kleidon., Physics of Life Reviews, vol 7 no. 4 (2010), pp. 467-470 [10.1016/j.plrev.2010.10.008] [abs].
  • Bejan, A; Lorente, S, The constructal law of design and evolution in nature., Philosophical Transactions of the Royal Society of London: Biological Sciences, vol 365 no. 1545 (2010), pp. 1335-1347 [10.1098/rstb.2009.0302] [abs].
  • Bejan, A; Jones, EC; Charles, JD, The evolution of speed in athletics: Why the fastest runners are black and swimmers white, International Journal of Design, Nature and Ecodynamics, vol 5 no. 3 (2010), pp. 199-211 [10.2495/DNE-V5-N3-199-211] [abs].
  • Bejan, A, The constructal-law origin of the wheel, size, and skeleton in animal design, American Journal of Physics, vol 78 no. 7 (2010), pp. 692-699 [10.1119/1.3431988] [abs].
  • Bello-Ochende, T; Meyer, JP; Bejan, A, Constructal multi-scale pin-fins, International Journal of Heat and Mass Transfer, vol 53 no. 13-14 (2010), pp. 2773-2779 [10.1016/j.ijheatmasstransfer.2010.02.021] [abs].
  • Bello-Ochende, T; Meyer, JP; Bejan, A, Maximum heat transfer from multi-scale fins arranged in a row with non-uniform geometry, 2010 14th International Heat Transfer Conference, IHTC 14, vol 3 (2010), pp. 557-563 [10.1115/IHTC14-22808] [abs].
  • Cetkin, E; Lorente, S; Bejan, A, Natural constructal emergence of vascular design with turbulent flow, Journal of Applied Physics, vol 107 no. 11 (2010) [10.1063/1.3430941] [abs].
  • Cho, KH; Lee, J; Ahn, HS; Bejan, A; Kim, MH, Fluid flow and heat transfer in vascularized cooling plates, International Journal of Heat and Mass Transfer, vol 53 no. 19-20 (2010), pp. 3607-3614 [10.1016/j.ijheatmasstransfer.2010.03.027] [abs].
  • Cho, KH; Lee, J; Kim, MH; Bejan, A, Vascular design of constructal structures with low flow resistance and nonuniformity, International Journal of Thermal Sciences, vol 49 no. 12 (2010), pp. 2309-2318 [10.1016/j.ijthermalsci.2010.07.009] [abs].
  • Kang, DH; Lorente, S; Bejan, A, Constructal dendritic configuration for the radiation heating of a solid stream, Journal of Applied Physics, vol 107 no. 11 (2010) [10.1063/1.3429195] [abs].
  • Kang, DH; Lorente, S; Bejan, A, Constructal architecture for heating a stream by convection, International Journal of Heat and Mass Transfer, vol 53 no. 9-10 (2010), pp. 2248-2255 [10.1016/j.ijheatmasstransfer.2009.12.006] [abs].
  • Kim, Y; Lorente, S; Bejan, A, Constructal multi-tube configuration for natural and forced convection in cross-flow, International Journal of Heat and Mass Transfer, vol 53 no. 23-24 (2010), pp. 5121-5128 [10.1016/j.ijheatmasstransfer.2010.07.053] [abs].
  • Koonsrisuk, A; Lorente, S; Bejan, A, Constructal solar chimney configuration, International Journal of Heat and Mass Transfer, vol 53 no. 1-3 (2010), pp. 327-333 [10.1016/j.ijheatmasstransfer.2009.09.026] [abs].
  • Lorente, S; Bejan, A, Few large and many small: Hierarchy in movement on earth, International Journal of Design, Nature and Ecodynamics, vol 5 no. 3 (2010), pp. 254-267 [10.2495/DNE-V5-N3-254-267] [abs].
  • Lorente, S; Koonsrisuk, A; Bejan, A, Constructal distribution of solar chimney power plants: Few large and many small, International Journal of Green Energy, vol 7 no. 6 (2010), pp. 577-592 [10.1080/15435075.2010.529402] [abs].
  • Lorente, S; Lee, J; Bejan, A, The "flow of stresses" concept: The analogy between mechanical strength and heat convection, International Journal of Heat and Mass Transfer, vol 53 no. 15-16 (2010), pp. 2963-2968 [10.1016/j.ijheatmasstransfer.2010.03.038] [abs].
  • Rocha, LAO; Lorente, S; Bejan, A, Distributed energy tapestry for heating the landscape, Journal of Applied Physics, vol 108 no. 12 (2010) [10.1063/1.3516155] [abs].
  • Wang, KM; Lorente, S; Bejan, A, Vascular structures for volumetric cooling and mechanical strength, Journal of Applied Physics, vol 107 no. 4 (2010) [10.1063/1.3294697] [abs].
  • Zeng, X; Dai, W; Bejan, A, Vascular countercurrent network for 3-D triple-layered skin structure with radiation heating, Numerical Heat Transfer Part A: Applications, vol 57 no. 6 (2010), pp. 369-391 [10.1080/10407781003659599] [abs].
  • Charles, JD; Bejan, A, The evolution of speed, size and shape in modern athletics., The Journal of Experimental Biology, vol 212 no. Pt 15 (2009), pp. 2419-2425 [10.1242/jeb.031161] [abs].
  • Bejan, A; Marden, JH, The constructal unification of biological and geophysical design., Physics of Life Reviews, vol 6 no. 2 (2009), pp. 85-102 [10.1016/j.plrev.2008.12.002] [abs].
  • Vafai, K; Bejan, A; Minkowycz, WJ; Khanafer, K, A Critical Systhesis of Pertinent Models for Turbulent Transport through Porous Media (2009), pp. 389-416 [10.1002/9780470172599.ch12] [abs].
  • Bejan, A, Thermodynamics Fundamentals (2009), pp. 802-817 [10.1002/9780470432754.ch14] [abs].
  • Bejan, A, Two hierarchies in science: The free flow of ideas and the academy, International Journal of Design, Nature and Ecodynamics, vol 4 no. 4 (2009), pp. 386-394 [10.2495/DNE-V4-N4-386-394] [abs].
  • Bejan, A, The golden ratio predicted : Vision , cognition and locomotionotion as a single designin nature, International Journal of Design, Nature and Ecodynamics, vol 4 no. 2 (2009), pp. 97-104 [10.2495/DNE-V4-N2-97-104] [abs].
  • Bejan, A, Science and technology as evolving flow architectures, International Journal of Energy Research, vol 33 no. 2 (2009), pp. 112-125 [10.1002/er.1427] [abs].
  • Bello-Ochende, T; Meyer, JP; Bejan, A, Constructal ducts with wrinkled entrances, International Journal of Heat and Mass Transfer, vol 52 no. 15-16 (2009), pp. 3628-3633 [10.1016/j.ijheatmasstransfer.2009.03.014] [abs].
  • Combelles, L; Lorente, S; Bejan, A, Leaflike architecture for cooling a flat body, Journal of Applied Physics, vol 106 no. 4 (2009) [10.1063/1.3176941] [abs].
  • Kim, S; Lorente, S; Bejan, A, Transient behavior of vascularized walls exposed to sudden heating, International Journal of Thermal Sciences, vol 48 no. 11 (2009), pp. 2046-2052 [10.1016/j.ijthermalsci.2009.03.019] [abs].
  • Kim, S; Lorente, S; Bejan, A, Design with constructal theory: Vascularized composites for volumetric cooling, ASME International Mechanical Engineering Congress and Exposition, Proceedings, vol 8 (2009), pp. 437-444 [10.1115/IMECE2008-66334] [abs].
  • Kim, YS; Lorente, S; Bejan, A, Constructal steam generator architecture, International Journal of Heat and Mass Transfer, vol 52 no. 9-10 (2009), pp. 2362-2369 [10.1016/j.ijheatmasstransfer.2008.10.021] [abs].
  • Kim, YS; Lorente, S; Bejan, A, Distribution of size in steam turbine power plants, International Journal of Energy Research, vol 33 no. 11 (2009), pp. 989-998 [10.1002/er.1528] [abs].
  • Lee, J; Lorente, S; Bejan, A; Kim, M, Vascular structures with flow uniformity and small resistance, International Journal of Heat and Mass Transfer, vol 52 no. 7-8 (2009), pp. 1761-1768 [10.1016/j.ijheatmasstransfer.2008.09.027] [abs].
  • Lee, J; Lorente, S; Bejan, A, Vascular design for thermal management of heated structures, The Aeronautical Journal, vol 113 no. 1144 (2009), pp. 397-407 [abs].
  • Lee, J; Lorente, S; Bejan, A, Transient cooling response of smart vascular materials for self-cooling, Journal of Applied Physics, vol 105 no. 6 (2009) [10.1063/1.3068323] [abs].
  • Lorente, S; Bejan, A, Global distributed energy systems, WIT Transactions on Ecology and the Environment, vol 127 (2009), pp. 261-270 [10.2495/RAV090231] [abs].
  • Lorente, S; Bejan, A, Constructal design of vascular porous materials and electrokinetic mass transfer, Transport in Porous Media, vol 77 no. 2 (2009), pp. 305-322 [10.1007/s11242-008-9283-z] [abs].
  • Lorente, S; Bejan, A, Vascularized smart materials: Designed porous media for self-healing and self-cooling, Journal of Porous Media, vol 12 no. 1 (2009), pp. 1-18 [10.1615/JPorMedia.v12.i1.10] [abs].
  • Miguel, AF; Bejan, A, The principle that generates dissimilar patterns inside aggregates of organisms, Physica A: Statistical Mechanics and its Applications, vol 388 no. 5 (2009), pp. 727-731 [10.1016/j.physa.2008.11.013] [abs].
  • Revellin, R; Thome, JR; Bejan, A; Bonjour, J, Constructal tree-shaped microchannel networks for maximizing the saturated critical heat flux, International Journal of Thermal Sciences, vol 48 no. 2 (2009), pp. 342-352 [10.1016/j.ijthermalsci.2008.06.009] [abs].
  • Rocha, LAO; Lorente, S; Bejan, A, Tree-shaped vascular wall designs for localized intense cooling, International Journal of Heat and Mass Transfer, vol 52 no. 19-20 (2009), pp. 4535-4544 [10.1016/j.ijheatmasstransfer.2009.03.003] [abs].
  • Wang, KM; Lorente, S; Bejan, A, The transient response of vascular composites cooled with grids and radial channels, International Journal of Heat and Mass Transfer, vol 52 no. 19-20 (2009), pp. 4175-4183 [10.1016/j.ijheatmasstransfer.2009.04.021] [abs].
  • Wang, KM; Lorente, S; Bejan, A, Vascular materials cooled with grids and radial channels, International Journal of Heat and Mass Transfer, vol 52 no. 5-6 (2009), pp. 1230-1239 [10.1016/j.ijheatmasstransfer.2008.08.027] [abs].
  • Wechsatol, W; Lorente, S; Bejan, A; Ordonez, JC, Elemental T and Y shapes of tree networks of ducts with various cross-sectional shapes, Journal of Hydraulic Engineering, vol 135 no. 2 (2009), pp. 132-139 [10.1061/(ASCE)0733-9429(2009)135:2(132)] [abs].
  • Zhang, H; Lorente, S; Bejan, A, Vascularization with line-to-line trees in counterflow heat exchange, International Journal of Heat and Mass Transfer, vol 52 no. 19-20 (2009), pp. 4327-4342 [10.1016/j.ijheatmasstransfer.2009.03.064] [abs].
  • Bejan, A; Lorente, S; Lee, J, Unifying constructal theory of tree roots, canopies and forests., Journal of Theoretical Biology, vol 254 no. 3 (2008), pp. 529-540 [10.1016/j.jtbi.2008.06.026] [abs].
  • Bejan, A; Lorente, S, Design with Constructal Theory, Design with Constructal Theory (2008), pp. 1-529 [10.1002/9780470432709] [abs].
  • Bejan, A; Lorente, S, Vascularized multi-functional materials and structures, Advanced Materials Research, vol 47-50 PART 1 (2008), pp. 511-514 [abs].
  • Bejan, A, Constructal self-organization of research: Empire building versus the individual investigator, International Journal of Design, Nature and Ecodynamics, vol 3 no. 3 (2008), pp. 177-189 [10.2495/DNE-V3-N3-177-189] [abs].
  • Bejan, A, The constructal law of "designedness" in nature, AIP Conference Proceedings, vol 1033 (2008), pp. 207-212 [10.1063/1.2979031] [abs].
  • Dai, W; Wang, H; Jordan, PM; Mickens, RE; Bejan, A, A mathematical model for skin burn injury induced by radiation heating, International Journal of Heat and Mass Transfer, vol 51 no. 23-24 (2008), pp. 5497-5510 [10.1016/j.ijheatmasstransfer.2008.01.006] [abs].
  • Kim, S; Lorente, S; Bejan, A; Miller, W; Morse, J, The emergence of vascular design in three dimensions, Journal of Applied Physics, vol 103 no. 12 (2008) [10.1063/1.2936919] [abs].
  • Kim, S; Lorente, S; Bejan, A, Dendritic vascularization for countering intense heating from the side, International Journal of Heat and Mass Transfer, vol 51 no. 25-26 (2008), pp. 5877-5886 [10.1016/j.ijheatmasstransfer.2008.04.063] [abs].
  • Lee, J; Kim, S; Lorente, S; Bejan, A, Vascularization with trees matched canopy to canopy: Diagonal channels with multiple sizes, International Journal of Heat and Mass Transfer, vol 51 no. 7-8 (2008), pp. 2029-2040 [10.1016/j.ijheatmasstransfer.2007.06.015] [abs].
  • Lloyd, S; Banerjee, D; Bejan, A; Beretta, GP; Geskin, E; Ghoniem, A; Gutowski, TG; Gyftopoulos, EP; Keck, JC; Lior, N; Miller, S; Nieuwenhuizen, TM; Peterson, R; Salamon, P; Williamson, L, Discussion on "The second law and energy", AIP Conference Proceedings, vol 1033 (2008), pp. 374-380 [10.1063/1.2979062] [abs].
  • Lloyd, S; Bejan, A; Bennett, C; Beretta, GP; Butler, H; Gordon, L; Grmela, M; Gyftopoulos, EP; Hatsopoulos, GN; Jou, D; Kjelstrup, S; Lior, N; Miller, S; Rubi, M; Schneider, ED; Sekulic, DP; Zhang, Z, Discussion on "frontiers of the second law", AIP Conference Proceedings, vol 1033 (2008), pp. 253-261 [10.1063/1.2979039] [abs].
  • Lorente, S; Bejan, A, Vascularized svelte (compact) flow architectures, ASME International Mechanical Engineering Congress and Exposition, Proceedings, vol 6 (2008), pp. 461-471 [10.1115/IMECE2007-41060] [abs].
  • Wang, KM; Lee, J; Lorente, S; Bejan, A, Constructal theory and design of vascular structures, 10th Electronics Packaging Technology Conference, EPTC 2008 (2008), pp. 137-143 [10.1109/EPTC.2008.4763424] [abs].
  • Bejan, A; Lorente, S, Constructal tree-shaped flow structures, Applied Thermal Engineering, vol 27 no. 4 (2007), pp. 755-761 [10.1016/j.applthermaleng.2006.10.008] [abs].
  • Bejan, A; Lorente, S, Construcral theory and its relevance to green energy, International Journal of Green Energy, vol 4 no. 1 (2007), pp. 105-117 [10.1080/15435070601015676] [abs].
  • Bejan, A, The many and the few, Mechanical Engineering, vol 129 no. 7 (2007), pp. 42-43 [abs].
  • Bejan, A, Why university rankings do not change: Education as a natural hierarchical flow architecture, International Journal of Design and Nature, vol 2 no. 4 (2007), pp. 319-327 [10.2495/JDN-V2-N4-319-327] [abs].
  • Bejan, A, Constructal theory of pattern formation, Hydrology and Earth System Sciences, vol 11 no. 2 (2007), pp. 753-768 [abs].
  • Bejan, A, The constructal law in nature and society, Constructal Theory of Social Dynamics (2007), pp. 1-33 [10.1007/978-0-387-47681-0_1] [abs].
  • Bello-Ochende, T; Liebenberg, L; Malan, AG; Bejan, A; Meyer, JP, Constructal conjugate heat transfer in three-dimensional cooling channels, Journal of Enhanced Heat Transfer: theory and application in high performance heat and mass transfer, vol 14 no. 4 (2007), pp. 279-293 [10.1615/JEnhHeatTransf.v14.i4.20] [abs].
  • Kim, S; Lorente, S; Bejan, A, Vascularized materials with heating from one side and coolant forced from the other side, International Journal of Heat and Mass Transfer, vol 50 no. 17-18 (2007), pp. 3498-3506 [10.1016/j.ijheatmasstransfer.2007.01.020] [abs].
  • Queiros-Conde, D; Bonjour, J; Wechsatol, W; Bejan, A, Parabolic scaling of tree-shaped constructal network, Physica A: Statistical Mechanics and its Applications, vol 384 no. 2 (2007), pp. 719-724 [10.1016/j.physa.2007.05.037] [abs].
  • Walsh, EJ; Nolan, KP; McEligot, DM; Volino, RJ; Bejan, A, Conditionally-sampled turbulent and nonturbulent measurements of entropy generation rate in the transition region of boundary layers, Journal of Fluids Engineering, vol 129 no. 5 (2007), pp. 659-664 [10.1115/1.2717622] [abs].
  • Wang, H; Dai, W; Bejan, A, Optimal temperature distribution in a 3D triple-layered skin structure embedded with artery and vein vasculature and induced by electromagnetic radiation, International Journal of Heat and Mass Transfer, vol 50 no. 9-10 (2007), pp. 1843-1854 [10.1016/j.ijheatmasstransfer.2006.10.005] [abs].
  • Wang, KM; Lorente, S; Bejan, A, Vascularization with grids of channels: Multiple scales, loops and body shapes, Journal of Physics D: Applied Physics, vol 40 no. 15 (2007), pp. 4740-4749 [10.1088/0022-3727/40/15/057] [abs].
  • Zhang, H; Lorente, S; Bejan, A, Vascularization with trees that alternate with upside-down trees, Journal of Applied Physics, vol 101 no. 9 (2007) [10.1063/1.2723186] [abs].
  • Bejan, A, Exergy Analysis, Entropy Generation Minimization, and Constructal Theory, vol 4 (2006), pp. 117-143 [10.1002/0471777471.ch4] [abs].
  • Bejan, A, Thermodynamics Fundamentals, vol 4 (2006), pp. 94-116 [10.1002/0471777471.ch3] [abs].
  • Bejan, A; Marden, JH, Unifying constructal theory for scale effects in running, swimming and flying., The Journal of Experimental Biology, vol 209 no. Pt 2 (2006), pp. 238-248 [10.1242/jeb.01974] [abs].
  • Bejan, A; Gobin, D, Constructal theory of droplet impact geometry, International Journal of Heat and Mass Transfer, vol 49 no. 15-16 (2006), pp. 2412-2419 [10.1016/j.ijheatmasstransfer.2006.02.001] [abs].
  • Bejan, A; Lorente, S; Wang, KM, Networks of channels for self-healing composite materials, Journal of Applied Physics, vol 100 no. 3 (2006) [10.1063/1.2218768] [abs].
  • Bejan, A; Lorente, S, Constructal theory of generation of configuration in nature and engineering, Journal of Applied Physics, vol 100 no. 4 (2006) [10.1063/1.2221896] [abs].
  • Bejan, A; Lorente, S, Design with constructal theory, International Journal of Engineering Education, vol 22 no. 1 (2006), pp. 140-147 [abs].
  • Bejan, A; Lorente, S, Design with constructal theory, International Journal of Engineering Education, vol 22 no. 1 PART I (2006), pp. 140-147 [abs].
  • Bejan, A; Marden, JH, Constructing animal locomotion from new thermodynamics theory, American Scientist: the Magazine of Sigma XI, the Scientific Research Society, vol 94 no. 4 (2006), pp. 342-349 [abs].
  • Bejan, A, Energy: Editorial Introduction, Energy, vol 31 no. 5 (2006), pp. 551-552 [10.1016/j.energy.2005.08.003] [abs].
  • Bonjour, J; Bejan, A, Optimal distribution of cooling during gas compression, Energy, vol 31 no. 4 (2006), pp. 409-424 [10.1016/j.energy.2005.04.004] [abs].
  • Ciobanas, AI; Bejan, A; Fautrelle, Y, Dendritic solidification morphology viewed from the perspective of constructal theory, Journal of Physics D: Applied Physics, vol 39 no. 24 (2006), pp. 5252-5266 [10.1088/0022-3727/39/24/023] [abs].
  • Dai, W; Bejan, A; Tang, X; Zhang, L; Nassar, R, Optimal temperature distribution in a three dimensional triple-layered skin structure with embedded vasculature, Journal of Applied Physics, vol 99 no. 10 (2006) [10.1063/1.2199193] [abs].
  • Kim, S; Lorente, S; Bejan, A, Vascularized materials: Tree-shaped flow architectures matched canopy to canopy, Journal of Applied Physics, vol 100 no. 6 (2006) [10.1063/1.2349479] [abs].
  • Kim, S; Lorente, S; Wang, KM; Bejan, A, Vascularized materials: Grids of channels and trees matched canopy to canopy, American Society of Mechanical Engineerings, Bioengineering Division (Publication) BED (2006) [10.1115/IMECE2006-13200] [abs].
  • Kim, S; Lorente, S; Wang, KM; Bejan, A, Vascularized materials: Grids of channels and trees matched canopy to canopy, American Society of Mechanical Engineerings, Bioengineering Division (Publication) BED (2006) [abs].
  • Lorente, S; Bejan, A, Heterogeneous porous media as multiscale structures for maximum flow access, Journal of Applied Physics, vol 100 no. 11 (2006) [10.1063/1.2396842] [abs].
  • Reis, AH; Bejan, A, Constructal theory of global circulation and climate, International Journal of Heat and Mass Transfer, vol 49 no. 11-12 (2006), pp. 1857-1875 [10.1016/j.ijheatmasstransfer.2005.10.037] [abs].
  • Reis, AH; Miguel, AF; Bejan, A, Constructal theory of particle agglomeration and design of air-cleaning devices, Journal of Physics D: Applied Physics, vol 39 no. 10 (2006), pp. 2311-2318 [10.1088/0022-3727/39/10/046] [abs].
  • Robbe, M; Sciubba, E; Lorente, S; Bejan, A, Numerical analysis of a tree-shaped cooling structure for a 2-D Slab: A validation of a "constructally optimal" configuration, Proceedings of 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA2006, vol 2006 (2006) [abs].
  • Rocha, LAO; Lorente, S; Bejan, A, Conduction tree networks with loops for cooling a heat generating volume, International Journal of Heat and Mass Transfer, vol 49 no. 15-16 (2006), pp. 2626-2635 [10.1016/j.ijheatmasstransfer.2006.01.017] [abs].
  • Silva, AKD; Bejan, A, Dendritic counterflow heat exchanger experiments, International Journal of Thermal Sciences, vol 45 no. 9 (2006), pp. 860-869 [10.1016/j.ijthermalsci.2005.12.006] [abs].
  • Silva, AKD; Lorente, S; Bejan, A, Constructal multi-scale structures for maximal heat transfer density, Energy, vol 31 no. 5 (2006), pp. 620-635 [10.1016/j.energy.2005.04.011] [abs].
  • Tang, X; Dai, W; Nassar, R; Bejan, A, Optimal temperature distribution in a three-dimensional triple-layered skin structure embedded with artery and vein vasculature, Numerical Heat Transfer Part A: Applications, vol 50 no. 9 (2006), pp. 809-834 [10.1080/10407780600669175] [abs].
  • Walsh, EJ; Hernon, DH; Eligot, DMM; Davies, MRD; Bejan, A, Application of constructal theory to prediction of boundary layer transition onset, Proceedings of the ASME Turbo Expo, vol 3 PART B (2006), pp. 1251-1259 [10.1115/GT2006-91166] [abs].
  • Wang, KM; Lorente, S; Bejan, A, Vascularized networks with two optimized channel sizes, Journal of Physics D: Applied Physics, vol 39 no. 14 (2006), pp. 3086-3096 [10.1088/0022-3727/39/14/031] [abs].
  • Wechsatol, W; Lorente, S; Bejan, A, Tree-shaped flow structures with local junction losses, International Journal of Heat and Mass Transfer, vol 49 no. 17-18 (2006), pp. 2957-2964 [10.1016/j.ijheatmasstransfer.2006.01.047] [abs].
  • Zimparov, VD; Silva, AKD; Bejan, A, Thermodynamic optimization of tree-shaped flow geometries, International Journal of Heat and Mass Transfer, vol 49 no. 9-10 (2006), pp. 1619-1630 [10.1016/j.ijheatmasstransfer.2005.11.016] [abs].
  • Zimparov, VD; Silva, AKD; Bejan, A, Thermodynamic optimization of tree-shaped flow geometries with constant channel wall temperature, International Journal of Heat and Mass Transfer, vol 49 no. 25-26 (2006), pp. 4839-4849 [10.1016/j.ijheatmasstransfer.2006.05.024] [abs].
  • Zimparov, VD; Silva, AKD; Bejan, A, Constructal tree-shaped parallel flow heat exchangers, International Journal of Heat and Mass Transfer, vol 49 no. 23-24 (2006), pp. 4558-4566 [10.1016/j.ijheatmasstransfer.2006.04.035] [abs].
  • Bejan, A, The constructal law of organization in nature: tree-shaped flows and body size., The Journal of Experimental Biology, vol 208 no. Pt 9 (2005), pp. 1677-1686 [10.1242/jeb.01487] [abs].
  • Bejan, A; Heperkan, H; Kesgin, U, Thermodynamic optimization and constructal design, International Journal of Energy Research, vol 29 no. 7 (2005) [10.1002/er.1093] [abs].
  • Bejan, A; Lorente, S, Constructual theory of energy-system and flow configurations, Int. J. Exergy (Switzerland), vol 2 no. 4 (2005), pp. 335-347 [10.1504/IJEX.2005.007785] [abs].
  • Bejan, A; Lorente, S, Constructal multi-scale and multi-objective structures, International Journal of Energy Research, vol 29 no. 7 (2005), pp. 689-710 [10.1002/er.1100] [abs].
  • Bejan, A; Morega, A; West, GB; Brown, JH, Constructing a theory for scaling and more (multiple letters), Physics Today, vol 58 no. 7 (2005), pp. 20-22 [abs].
  • Bejan, A; Reis, AH, Thermodynamic optimization of global circulation and climate, International Journal of Energy Research, vol 29 no. 4 (2005), pp. 303-316 [10.1002/er.1058] [abs].
  • Bello-Ochende, T; Bejan, A, Constructal multi-scale cylinders with natural convection, International Journal of Heat and Mass Transfer, vol 48 no. 21-22 (2005), pp. 4300-4306 [10.1016/j.ijheatmasstransfer.2005.05.023] [abs].
  • Bello-Ochende, T; Bejan, A, Constructal multi-scale cylinders in cross-flow, International Journal of Heat and Mass Transfer, vol 48 no. 7 (2005), pp. 1373-1383 [10.1016/j.ijheatmasstransfer.2004.10.013] [abs].
  • Bergles, E; Amon, CH; Golobič, I; Bejan, A, Journal of Mechanical Engineering: Editorial, Strojniski Vestnik, vol 51 no. 7-8 (2005) [abs].
  • Gosselin, L; Bejan, A, Emergence of asymmetry in constructal tree flow networks, Journal of Applied Physics, vol 98 no. 10 (2005) [10.1063/1.2133899] [abs].
  • Gosselin, L; Bejan, A, Tree networks for minimal pumping power, International Journal of Thermal Sciences, vol 44 no. 1 (2005), pp. 53-63 [10.1016/j.ijthermalsci.2004.06.004] [abs].
  • Lorente, S; Bejan, A, Sveltness, freedom to morph, and the constructal design of multi-scale flow structures, American Society of Mechanical Engineerings, Bioengineering Division (Publication) BED, vol 45 (2005), pp. 271-277 [10.1115/IMECE2005-80027] [abs].
  • Lorente, S; Bejan, A, Svelteness, freedom to morph, and constructal multi-scale flow structures, International Journal of Thermal Sciences, vol 44 no. 12 (2005), pp. 1123-1130 [10.1016/j.ijthermalsci.2005.08.011] [abs].
  • Morega, AM; Bejan, A, A construictal approach to the optimal design of photovoltaic cells, International Journal of Green Energy, vol 2 no. 3 (2005), pp. 233-242 [10.1080/01971520500198262] [abs].
  • Silva, AKD; Bejan, A, Constructal design: The generation of multi-scale heat and fluid flow structures, Journal of Heat Transfer, vol 127 no. 8 (2005) [10.1115/1.2032867] [abs].
  • Silva, AKD; Bejan, A, Constructal multi-scale structure for maximal heat transfer density in natural convection, International Journal of Heat and Fluid Flow, vol 26 no. 1 (2005), pp. 34-44 [10.1016/j.ijheatfluidflow.2004.05.002] [abs].
  • Silva, AKD; Lorente, S; Bejan, A, Constructal multi-scale structures with asymmetric heat sources of finite thickness, International Journal of Heat and Mass Transfer, vol 48 no. 13 (2005), pp. 2662-2672 [10.1016/j.ijheatmasstransfer.2005.01.028] [abs].
  • Silva, AKD; Lorenzini, G; Bejan, A, Distribution of heat sources in vertical open channels with natural convection, International Journal of Heat and Mass Transfer, vol 48 no. 8 (2005), pp. 1462-1469 [10.1016/j.ijheatmasstransfer.2004.10.019] [abs].
  • Vargas, JVC; Bejan, A; Ordonez, JC; Amico, SC, The optimal shape for a unit PEM fuel cell, Proceedings of the 3rd International Conference on Fuel Cell Science, Engineering, and Technology, 2005 (2005), pp. 459-471 [abs].
  • Vargas, JVC; Ordonez, JC; Bejan, A, Constructal PEM fuel cell stack design, International Journal of Heat and Mass Transfer, vol 48 no. 21-22 (2005), pp. 4410-4427 [10.1016/j.ijheatmasstransfer.2005.05.009] [abs].
  • Vargas, JVC; Ordonez, JC; Zamfirescu, C; Campos, MC; Bejan, A, Optimal ground tube length for cooling of electronics shelters, Heat Transfer Engineering, vol 26 no. 10 (2005), pp. 8-20 [10.1080/01457630500248513] [abs].
  • Wechsatol, W; Bejan, A; Lorente, S, Tree-shaped flow architectures: Strategies for increasing optimization speed and accuracy, Numerical Heat Transfer Part A: Applications, vol 48 no. 8 (2005), pp. 731-744 [10.1080/10407780500197707] [abs].
  • Wechsatol, W; Lorente, S; Bejan, A, Tree-shaped networks with loops, International Journal of Heat and Mass Transfer, vol 48 no. 3-4 (2005), pp. 573-583 [10.1016/j.ijheatmasstransfer.2004.08.020] [abs].
  • Zamfirescu, C; Bejan, A, Tree-shaped structures for cold storage, International Journal of Refrigeration, vol 28 no. 2 (2005), pp. 231-241 [10.1016/j.ijrefrig.2004.08.010] [abs].
  • Bejan, A; Lorente, S, A course on flow-system configuration and multi-scale design, American Society of Mechanical Engineerings, Bioengineering Division (Publication) BED, vol 44 (2004), pp. 93-99 [10.1115/IMECE2004-59203] [abs].
  • Bejan, A; Lorente, S, Equilibrium and nonequilibrium flow system architectures, International Journal of Heat and Technology, vol 22 no. 1 (2004), pp. 85-92 [abs].
  • Bejan, A; Lorente, S, The constructal law and the thermodynamics of flow systems with configuration, International Journal of Heat and Mass Transfer, vol 47 no. 14-16 (2004), pp. 3203-3214 [10.1016/j.ijheatmasstransfer.2004.02.007] [abs].
  • Bejan, A, Designed porous media: Maximal heat transfer density at decreasing length scales, International Journal of Heat and Mass Transfer, vol 47 no. 14-16 (2004), pp. 3073-3083 [10.1016/j.ijheatmasstransfer.2004.02.025] [abs].
  • Bejan, A, Heat and technology: Foreword, International Journal of Heat and Technology, vol 22 no. 1 (2004) [abs].
  • Bello-Ochende, T; Bejan, A, Optimal spacings for mixed convection, Journal of Heat Transfer: Transactions of the ASME, vol 126 no. 6 (2004), pp. 956-962 [10.1115/1.1833363] [abs].
  • Bello-Ochende, T; Bejan, A, Maximal heat transfer density: Plates with multiple lengths in forced convection, International Journal of Thermal Sciences, vol 43 no. 12 (2004), pp. 1181-1186 [10.1016/j.ijthermalsci.2004.05.002] [abs].
  • Biserni, C; Rocha, LAO; Bejan, A, Inverted fins: Geometric optimization of the intrusion into a conducting wall, International Journal of Heat and Mass Transfer, vol 47 no. 12-13 (2004), pp. 2577-2586 [10.1016/j.ijheatmasstransfer.2003.12.018] [abs].
  • Bonjour, J; Rocha, LAO; Bejan, A; Meunier, F, Dendritic fins optimization for a coaxial two-stream heat exchanger, International Journal of Heat and Mass Transfer, vol 47 no. 1 (2004), pp. 111-124 [10.1016/S0017-9310(03)00406-X] [abs].
  • Duharte, GI; de Haro, ML; Garcia, SC; Bejan, A, Thermodynamic optimization of radial MHD flow between parallel circular disks, J. Non-Equilib. Thermodyn. (Germany), vol 29 no. 2 (2004), pp. 141-156 [10.1515/JNETDY.2004.009] [abs].
  • Favre-Marinet, M; Person, SL; Bejan, A, Maximum heat transfer rate density in two-dimensional minichannels and microchannels, Microscale Thermophysical Engineering, vol 8 no. 3 (2004), pp. 225-237 [10.1080/10893950490477419] [abs].
  • Gosselin, L; Bejan, A; Lorente, S, Combined 'heat flow and strength' optimization of geometry: Mechanical structures most resistant to thermal attack, International Journal of Heat and Mass Transfer, vol 47 no. 14-16 (2004), pp. 3477-3489 [10.1016/j.ijheatmasstransfer.2004.01.020] [abs].
  • Gosselin, L; Bejan, A, Constructal heat trees at micro and nanoscales, Journal of Applied Physics, vol 96 no. 10 (2004), pp. 5852-5859 [10.1063/1.1782278] [abs].
  • Gosselin, L; Bejan, A, Constructal thermal optimization of an electromagnet, International Journal of Thermal Sciences, vol 43 no. 4 (2004), pp. 331-338 [10.1016/j.ijthermalsci.2003.08.004] [abs].
  • Lorente, S; Wechsatol, W; Bejan, A, Tree-shaped flow structures for human-scale and small-scales applications, International Journal of Heat and Technology, vol 22 no. 1 (2004), pp. 15-25 [abs].
  • Matos, RS; Laursen, TA; Vargas, JVC; Bejan, A, Three-dimensional optimization of staggered finned circular and elliptic tubes in forced convection, International Journal of Thermal Sciences, vol 43 no. 5 (2004), pp. 477-487 [10.1016/j.ijthermalsci.2003.10.003] [abs].
  • Matos, RS; Vargas, JVC; Laursen, TA; Bejan, A, Optimally staggered finned circular and elliptic tubes in forced convection, International Journal of Heat and Mass Transfer, vol 47 no. 6-7 (2004), pp. 1347-1359 [10.1016/j.ijheatmasstransfer.2003.08.015] [abs].
  • Pons, M; Bejan, A, Irreversibility in energy processes: non-dimensional quantification and balance, J. Non-Equilib. Thermodyn. (Germany), vol 29 no. 2 (2004), pp. 157-175 [10.1515/JNETDY.2004.010] [abs].
  • Silva, AKD; Bejan, A; Fautrelle, Y, Multiple length scales for maximal heat transfer density in forced and natural convection, Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, HT/FED 2004, vol 1 (2004), pp. 133-141 [abs].
  • Silva, AKD; Bejan, A; Lorente, S, Maximal heat transfer density in vertical morphing channels with natural convection, Numerical Heat Transfer; Part A: Applications, vol 45 no. 2 (2004), pp. 135-152 [abs].
  • Silva, AKD; Lorente, S; Bejan, A, Constructal multi-scale tree-shaped heat exchangers, Journal of Applied Physics, vol 96 no. 3 (2004), pp. 1709-1718 [10.1063/1.1766089] [abs].
  • Silva, AKD; Lorente, S; Bejan, A, Optimal distribution of discrete heat sources on a wall with natural convection, International Journal of Heat and Mass Transfer, vol 47 no. 2 (2004), pp. 203-214 [10.1016/j.ijheatmasstransfer.2003.07.007] [abs].
  • Silva, AKD; Lorente, S; Bejan, A, Optimal distribution of discrete heat sources on a plate with laminar forced convection, International Journal of Heat and Mass Transfer, vol 47 no. 10-11 (2004), pp. 2139-2148 [10.1016/j.ijheatmasstransfer.2003.12.009] [abs].
  • Silva, AKD; Vasile, C; Bejan, A, Disc cooled with high-conductivity inserts that extend inward from the perimeter, International Journal of Heat and Mass Transfer, vol 47 no. 19-20 (2004), pp. 4257-4263 [10.1016/j.ijheatmasstransfer.2004.04.024] [abs].
  • Vargas, JVC; Bejan, A, Thermodynamic optimization of internal structure in a fuel cell, International Journal of Energy Research, vol 28 no. 4 (2004), pp. 319-339 [abs].
  • Vargas, JVC; Ordonez, JC; Bejan, A, Constructal flow structure for a PEM fuel cell, International Journal of Heat and Mass Transfer, vol 47 no. 19-20 (2004), pp. 4177-4193 [10.1016/j.ijheatmasstransfer.2004.05.004] [abs].
  • Vargas, JVC; Ordonez, JC; Bejan, A, Fuel cells constructal optimization and research perspectives, Fuel Cell Science, Engineering and Technology - 2004 (2004), pp. 67-78 [abs].
  • Bejan, A, Constructal comment on a Fermat-type principle for heat flow, International Journal of Heat and Mass Transfer, vol 46 no. 10 (2003), pp. 1885-1886 [10.1016/S0017-9310(02)00488-X] [abs].
  • Arion, V; Cojocari, A; Bejan, A, Constructal tree shaped networks for the distribution of electrical power, Energy Conversion and Management, vol 44 no. 6 (2003), pp. 867-891 [10.1016/S0196-8904(02)00096-1] [abs].
  • Arion, V; Cojocari, A; Bejan, A, Integral measures of electric power distribution networks: Load-length curves and line-network multipliers, Energy Conversion and Management, vol 44 no. 7 (2003), pp. 1039-1051 [10.1016/S0196-8904(02)00108-5] [abs].
  • Bejan, A; Fautrelle, Y, Constructal multi-scale structure for maximal heat transfer density, Acta Mechanica, vol 163 no. 1-2 (2003), pp. 39-49 [abs].
  • Bejan, A; Lorente, S, Thermodynamic formulation of the constructal law, American Society of Mechanical Engineerings, Bioengineering Division (Publication) BED, vol 43 (2003), pp. 163-172 [10.1115/IMECE2003-41167] [abs].
  • Bejan, A, Simple methods for convection in porous media: Scale analysis and the intersection of asymptotes, International Journal of Energy Research, vol 27 no. 10 (2003), pp. 859-874 [10.1002/er.922] [abs].
  • Bejan, A, Constructal theory: Tree-shaped flows and energy systems for aircraft, Journal of Aircraft, vol 40 no. 1 (2003), pp. 43-48 [abs].
  • Bejan, A, Constructal tree-shaped paths for conduction and convection, International Journal of Energy Research, vol 27 no. 4 (2003), pp. 283-299 [10.1002/er.875] [abs].
  • Bejan, A, Optimal internal structure of volumes cooled by single-phase forced and natural convection, Journal of Electronic Packaging, Transactions of the ASME, vol 125 no. 2 SPEC. (2003), pp. 200-207 [10.1115/1.1566970] [abs].
  • Bejan, A, Flows in environmental fluids and porous media, International Journal of Energy Research, vol 27 no. 9 (2003), pp. 825-846 [10.1002/er.913] [abs].
  • Bejan, A, Designed porous and multi-scale flow structures, Institute of Physics Conference Series, vol 180 (2003), pp. 307-316 [abs].
  • Bello-Ochende, T; Bejan, A, Fitting the duct to the "body" of the convective flow, International Journal of Heat and Mass Transfer, vol 46 no. 10 (2003), pp. 1693-1701 [10.1016/S0017-9310(02)00477-5] [abs].
  • Favre-Marinet, M; Person, SL; Bejan, A, Maximum heat transfer rate density in two-dimensional minichannels and microchannels, International Conference on Microchannels and Minichannels, vol 1 (2003), pp. 765-772 [abs].
  • Lorente, S; Wechsatol, W; Bejan, A, Optimization of tree-shaped flow distribution structures over a disc-shaped area, International Journal of Energy Research, vol 27 no. 8 (2003), pp. 715-723 [10.1002/er.907] [abs].
  • Ordonez, JC; Bejan, A; Cherry, RS, Designed porous media: Optimally nonuniform flow structures connecting one point with more points, International Journal of Thermal Sciences, vol 42 no. 9 (2003), pp. 857-870 [10.1016/S1290-0729(03)00058-9] [abs].
  • Ordonez, JC; Bejan, A, Minimum power requirement for environmental control of aircraft, Energy, vol 28 no. 12 (2003), pp. 1183-1202 [10.1016/S0360-5442(03)00105-1] [abs].
  • Ordóñez, JC; Bejan, A, System-level optimization of the sizes of organs for heat and fluid flow systems, International Journal of Thermal Sciences, vol 42 no. 4 (2003), pp. 335-342 [10.1016/S1290-0729(02)00035-2] [abs].
  • Rivera-Alvarez, A; Bejan, A, Constructal geometry and operation of adsorption processes, International Journal of Thermal Sciences, vol 42 no. 10 (2003), pp. 983-994 [10.1016/S1290-0729(03)00077-2] [abs].
  • Wechsatol, W; Lorente, S; Bejan, A, Dendritic heat convection on a disc, International Journal of Heat and Mass Transfer, vol 46 no. 23 (2003), pp. 4381-4391 [10.1016/S0017-9310(03)00295-3] [abs].
  • Zamfirescu, C; Bejan, A, Constructal tree-shaped two-phase flow for cooling a surface, International Journal of Heat and Mass Transfer, vol 46 no. 15 (2003), pp. 2785-2797 [10.1016/S0017-9310(03)00043-7] [abs].
  • Badr, HM; Abualhamayel, HI; El-Shaarawi, MAI; Zubair, SM; Howell, JR; Bejan, A, Theme issue on heat and fluid flow, Arabian Journal for Science and Engineering, vol 27 no. 2 C (2002) [abs].
  • Bejan, A; Lorente, S, Thermodynamic optimization of flow architecture: Dendritic structures and optimal sizes of components, American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, vol 42 (2002), pp. 83-91 [10.1115/IMECE2002-33158] [abs].
  • Bejan, A; Lorente, S, Thermodynamic optimization of flow architecture: Dendritic structures and optimal sizes of components, ASME International Mechanical Engineering Congress and Exposition, Proceedings (2002), pp. 83-91 [10.1115/IMECE2002-33158] [abs].
  • Bejan, A, Constructal theory of organization in nature: Dendritic flows, allometric laws and flight, Design and Nature, vol 3 (2002), pp. 57-66 [abs].
  • Bejan, A, Dendritic constructal heat exchanger with small-scale crossflows and larger-scales counterflows, International Journal of Heat and Mass Transfer, vol 45 no. 23 (2002), pp. 4607-4620 [10.1016/S0017-9310(02)00165-5] [abs].
  • Bejan, A, Fundamentals of exergy analysis, entropy generation minimization, and the generation of flow architecture, International Journal of Energy Research, vol 26 no. 7 (2002), pp. 545-565 [abs].
  • Lorente, S; Bejan, A, Combined 'flow and strength' geometric optimization: Internal structure in a vertical insulating wall with air cavities and prescribed strength, International Journal of Heat and Mass Transfer, vol 45 no. 16 (2002), pp. 3313-3320 [10.1016/S0017-9310(02)00052-2] [abs].
  • Lorente, S; Wechsatol, W; Bejan, A, Tree-shaped flow structures designed by minimizing path lengths, International Journal of Heat and Mass Transfer, vol 45 no. 16 (2002), pp. 3299-3312 [10.1016/S0017-9310(02)00051-0] [abs].
  • Rocha, LAO; Lorente, S; Bejan, A, Constructal design for cooling a disc-shaped area by conduction, International Journal of Heat and Mass Transfer, vol 45 no. 8 (2002), pp. 1643-1652 [10.1016/S0017-9310(01)00269-1] [abs].
  • Vargas, JVC; Bejan, A, The optimal shape of the interface between two conductive bodies with minimal thermal resistance, Journal of Heat Transfer, vol 124 no. 6 (2002), pp. 1218-1221 [10.1115/1.1497355] [abs].
  • Wechsatol, W; Lorente, S; Bejan, A, Optimal tree-shaped networks for fluid flow in a disc-shaped body, International Journal of Heat and Mass Transfer, vol 45 no. 25 (2002), pp. 4911-4924 [10.1016/S0017-9310(02)00211-9] [abs].
  • Alebrahim, A; Bejan, A, Thermodynamic optimization of heat-transfer equipment configuration in an environmental control system, International Journal of Energy Research, vol 25 no. 13 (2001), pp. 1127-1150 [10.1002/er.743] [abs].
  • Almogbel, M; Bejan, A, Constructal optimization of nonuniformly distributed tree-shaped flow structures for conduction, International Journal of Heat and Mass Transfer, vol 44 no. 22 (2001), pp. 4185-4194 [10.1016/S0017-9310(01)00080-1] [abs].
  • Bejan, A; Alebrahim, A, The extraction of power from a hot stream, International Journal of Energy Research, vol 25 no. 6 (2001), pp. 507-518 [10.1002/er.700] [abs].
  • Bejan, A; Lorente, S, Thermodynamic optimization of flow geometry in mechanical and civil engineering, Journal of Non-Equilibrium Thermodynamics, vol 26 no. 4 (2001), pp. 305-354 [10.1515/JNETDY.2002.022] [abs].
  • Bejan, A, Entropy generation minimization: The method and its applications, Strojniski Vestnik/Journal of Mechanical Engineering, vol 47 no. 8 (2001), pp. 345-355 [abs].
  • Bejan, A, The tree of convective heat streams: Its thermal insulation function and the predicted 3/4-power relation between body heat loss and body size, International Journal of Heat and Mass Transfer, vol 44 no. 4 (2001), pp. 699-704 [10.1016/S0017-9310(00)00138-1] [abs].
  • Neagun, M; Bejan, A, Constructal placement of high-conductivity inserts in a slab: Optimal design of "Roughness", Journal of Heat Transfer, vol 123 no. 6 (2001), pp. 1184-1189 [10.1115/1.1392988] [abs].
  • Rocha, LAO; Bejan, A, Geometric optimization of periodic flow and heat transfer in a volume cooled by parallel tubes, Journal of Heat Transfer, vol 123 no. 2 (2001), pp. 233-239 [10.1115/1.1337654] [abs].
  • Shiba, T; Bejan, A, Thermodynamic optimization of geometric structure in the counterflow heat exchanger for an environmental control system, Energy, vol 26 no. 5 (2001), pp. 493-511 [10.1016/S0360-5442(01)00011-1] [abs].
  • Vargas, JVC; Bejan, A; Siems, DL, Integrative thermodynamic optimization of the crossflow heat exchanger for an aircraft environmental control system, Journal of Heat Transfer, vol 123 no. 4 (2001), pp. 760-769 [10.1115/1.1375811] [abs].
  • Vargas, JVC; Bejan, A, Integrative thermodynamic optimization of the environmental control system of an aircraft, International Journal of Heat and Mass Transfer, vol 44 no. 20 (2001), pp. 3907-3917 [10.1016/S0017-9310(01)00033-3] [abs].
  • Vargas, JVC; Bejan, A, Thermodynamic optimization of finned crossflow heat exchangers for aircraft environmental control systems, International Journal of Heat and Fluid Flow, vol 22 no. 6 (2001), pp. 657-665 [10.1016/S0142-727X(01)00129-1] [abs].
  • Wechsatol, W; Lorente, S; Bejan, A, Tree-shaped insulated designs for the uniform distribution of hot water over an area, International Journal of Heat and Mass Transfer, vol 44 no. 16 (2001), pp. 3111-3123 [10.1016/S0017-9310(00)00338-0] [abs].
  • Wechsatol, W; Lorente, S; Bejan, A, Development of tree-shaped flows by adding new users to existing networks of hot water pipes, International Journal of Heat and Mass Transfer, vol 45 no. 4 (2001), pp. 723-733 [10.1016/S0017-9310(01)00200-9] [abs].
  • Almogbel, M; Bejan, A, Cylindrical trees of pin fins, International Journal of Heat and Mass Transfer, vol 43 no. 23 (2000), pp. 4285-4297 [abs].
  • Bejan, A; Almogbel, M, Constructal T-shaped fins, International Journal of Heat and Mass Transfer, vol 43 no. 12 (2000), pp. 2101-2115 [10.1016/S0017-9310(99)00283-5] [abs].
  • Bejan, A; Badescu, V; De Vos, A, Constructal theory of economics, Applied Energy, vol 67 no. 1-2 (2000), pp. 37-60 [10.1016/S0306-2619(00)00023-4] [abs].
  • Bejan, A; Badescu, V; Vos, AD, Constructal theory of economics structure generation in space and time, Energy Conversion and Management, vol 41 no. 13 (2000), pp. 1429-1451 [10.1016/S0196-8904(00)00038-8] [abs].
  • Bejan, A; Badescu, V; Vos, AD, Constructal theory of economics, Applied Energy, vol 67 no. 1-2 (2000), pp. 37-60 [abs].
  • Bejan, A; Errera, MR, Convective trees of fluid channels for volumetric cooling, International Journal of Heat and Mass Transfer, vol 43 no. 17 (2000), pp. 3105-3118 [10.1016/S0017-9310(99)00353-1] [abs].
  • Bejan, A; Rocha, LAO; Lorente, S, Thermodynamic optimization of geometry: T- and Y-shaped constructs of fluid streams, International Journal of Thermal Sciences, vol 39 no. 9-11 (2000), pp. 949-960 [abs].
  • Bejan, A, Architecture from exergy-based global optimization: Tree-shaped flows and energy systems for aircraft, 8th Symposium on Multidisciplinary Analysis and Optimization (2000) [abs].
  • Bejan, A, Thermodynamic optimization of geometry in environmental control systems for aircraft, International Journal of Heat and Technology, vol 18 no. 2 (2000), pp. 3-10 [abs].
  • Bejan, A, From heat transfer principles to shape and structure in nature: Constructal theory, Journal of Heat Transfer, vol 122 no. 3 (2000), pp. 430-449 [10.1115/1.1288406] [abs].
  • Ordonez, JC; Bejan, A, Entropy generation minimization in parallel-plates counterflow heat exchangers, International Journal of Energy Research, vol 24 no. 10 (2000), pp. 843-864 [10.1002/1099-114X(200008)24:103.0.CO;2-M] [abs].
  • Ordóñez, JC; Bejan, A, Entropy generation minimization in parallel-plates counterflow heat exchangers, International Journal of Energy Research, vol 24 no. 10 (2000), pp. 843-864 [10.1002/1099-114X(200008)24:10<843::AID-ER620>3.0.CO;2-M] [abs].
  • Vargas, JVC; Bejan, A, Thermodynamic optimization of the match between two streams with phase change, Energy, vol 25 no. 1 (2000), pp. 15-33 [10.1016/S0360-5442(99)00052-3] [abs].
  • Vargas, JVC; Ordóñez, JC; Bejan, A, Power extraction from a hot stream in the presence of phase change, International Journal of Heat and Mass Transfer, vol 43 no. 2 (2000), pp. 191-201 [abs].
  • Errera, MR; Bejan, A, Tree networks for flows in composite porous media, Journal of Porous Media, vol 2 no. 1 (1999), pp. 1-17 [abs].
  • Alebrahim, A; Bejan, A, Constructal trees of circular fins for conductive and convective heat transfer, International Journal of Heat and Mass Transfer, vol 42 no. 19 (1999), pp. 3585-3597 [10.1016/S0017-9310(99)00021-6] [abs].
  • Almogbel, M; Bejan, A, Conduction trees with spacings at the tips, International Journal of Heat and Mass Transfer, vol 42 no. 20 (1999), pp. 3739-3756 [10.1016/S0017-9310(99)00051-4] [abs].
  • Bejan, A; Dan, N, Constructal trees of convective fins, Journal of Heat Transfer, vol 121 no. 3 (1999), pp. 675-682 [abs].
  • Bejan, A; Dan, N, Two constructal routes to minimal heat flow resistance via greater internal complexity, Journal of Heat Transfer: Transactions of the ASME, vol 121 no. 1 (1999), pp. 6-XI [abs].
  • Bejan, A; Vargas, JVC; Ordonez, JC, Power extraction from a hot stream in the presence of phase change, International Journal of Heat and Mass Transfer, vol 43 no. 2 (1999), pp. 191-201 [abs].
  • Bejan, A, Thermodynamic optimization alternatives: Minimization of physical size subject to fixed power, International Journal of Energy Research, vol 23 no. 13 (1999), pp. 1111-1121 [abs].
  • Bejan, A, The First NATO Advanced Study Institute on Thermodynamic Optimization (Neptun, Romania, 1998), Energy, vol 24 no. 8 (1999), pp. 753-759 [abs].
  • Bejan, A, Role for exergy analysis and optimization in aircraft energy-system design, American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, vol 39 (1999), pp. 209-217 [abs].
  • Bejan, A, How nature takes shape: Extensions of constructal theory to ducts, rivers, turbulence, cracks, dendritic crystals and spatial economics, International Journal of Thermal Sciences, vol 38 no. 8 (1999), pp. 653-663 [abs].
  • Lewins, J; Bejan, A, Vortex tube optimization theory, Energy, vol 24 no. 11 (1999), pp. 931-943 [abs].
  • Neagu, M; Bejan, A, Constructal-theory tree networks of "constant" thermal resistance, Journal of Applied Physics, vol 86 no. 2 (1999), pp. 1136-1144 [abs].
  • Neagu, M; Bejan, A, Three-dimensional tree constructs of "constant" thermal resistance, Journal of Applied Physics, vol 86 no. 12 (1999), pp. 7107-7115 [abs].
  • Vargas, JVC; Bejan, A, Optimisation of film condensation with periodic wall cleaning, International Journal of Thermal Sciences, vol 38 no. 2 (1999), pp. 113-120 [abs].
  • Bejan, A; Dan, N; Cacuci, DG; Schütz, W, Exergy analysis of energy conversion during the thermal interaction between hot particles and water, Energy, vol 23 no. 11 (1998), pp. 913-928 [10.1016/S0360-5442(98)00045-0] [abs].
  • Bejan, A; Errera, MR, Maximum power from a hot stream, International Journal of Heat and Mass Transfer, vol 41 no. 13 (1998), pp. 2025-2035 [abs].
  • Bejan, A; Ikegami, Y; Ledezma, GA, Constructal theory of natural crack pattern formation for fastest cooling, International Journal of Heat and Mass Transfer, vol 41 no. 13 (1998), pp. 1945-1954 [abs].
  • Bejan, A; Ledezma, GA, Streets tree networks and urban growth: Optimal geometry for quickest access between a finite-size volume and one point, Physica A: Statistical Mechanics and its Applications, vol 255 no. 1-2 (1998), pp. 211-217 [abs].
  • Bejan, A; Tondeur, D, Equipartition, optimal allocation, and the constructal approach to predicting organization in nature, International Journal of Thermal Sciences, vol 37 no. 3 (1998), pp. 165-180 [abs].
  • Bejan, A, Questions in Fluid Mechanics: Natural Tree-Shaped Flows, Journal of Fluids Engineering, Transactions of the ASME, vol 120 no. 3 (1998), pp. 429-430 [abs].
  • Bejan, A, Constructal theory: From thermodynamic and geometric optimization to predicting shape in nature, Energy Conversion and Management, vol 39 no. 16-18 (1998), pp. 1705-1718 [abs].
  • Dan, N; Bejan, A; Cacuci, DG; Schütz, W, Evolution of a mixture of hot particles, steam, and water immersed in a water pool, Numerical Heat Transfer; Part A: Applications, vol 34 no. 5 (1998), pp. 463-478 [abs].
  • Dan, N; Bejan, A, Constructal tree networks for the time-dependent discharge of a finite-size volume to one point, Journal of Applied Physics, vol 84 no. 6 (1998), pp. 3042-3050 [abs].
  • Errera, MR; Bejan, A, Deterministic tree networks for river drainage basins, Fractals, vol 6 no. 3 (1998), pp. 245-261 [abs].
  • Ikegami, Y; Bejan, A, On the thermodynamic optimization of power plants with heat transfer and fluid flow irreversibilities, Journal of Solar Energy Engineering, Transactions of the ASME, vol 120 no. 2 (1998), pp. 139-144 [abs].
  • Jr, RAN; Bejan, A, Self-organization of the internal flow geometry in convective heat transfer, American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, vol 357 no. 3 (1998), pp. 149-157 [abs].
  • Jr, RAN; Bejan, A, Constructal optimization of internal flow geometry in convection, Journal of Heat Transfer: Transactions of the ASME, vol 120 no. 2 (1998), pp. 357-364 [abs].
  • Ledezma, GA; Bejan, A, Constructal three-dimensional trees for conduction between a volume and one point, Journal of Heat Transfer: Transactions of the ASME, vol 120 no. 4 (1998), pp. 977-984 [abs].
  • Radcenco, V; Vargas, JVC; Bejan, A, Thermodynamic optimization of a gas turbine power plant with pressure drop irreversibilities, Journal of Energy Resources Technology, Transactions of the ASME, vol 120 no. 3 (1998), pp. 233-240 [abs].
  • Ledezma, GA; Bejan, A; Errera, MR, Constructal tree networks for heat transfer, Journal of Applied Physics, vol 82 no. 1 (1997), pp. 89-100 [10.1063/1.365853] [abs].
  • ALSTER, TINA, PREFACE, Dermatologic Clinics, vol 15 no. 3 (1997), pp. xi-xi [10.1016/S0733-8635(05)70445-9] [abs].
  • Bejan, A; Dan, N; Cacuci, DG; Schütz, W, On the thermodynamic efficiency of energy conversion during the expansion of a mixture of hot particles, steam and liquid water, Energy, vol 22 no. 12 (1997), pp. 1119-1133 [10.1016/S0360-5442(97)00043-1] [abs].
  • Bejan, A; Dan, N, Maximum work from an electric battery model, Energy, vol 22 no. 1 (1997), pp. 93-102 [10.1016/S0360-5442(96)00092-8] [abs].
  • Bejan, A; Errera, MR, Deterministic tree networks for fluid flow: Geometry for minimal flow resistance between a volume and one point, Fractals, vol 5 no. 4 (1997), pp. 685-695 [abs].
  • Bejan, A, Constructal-theory network of conducting paths for cooling a heat generating volume, International Journal of Heat and Mass Transfer, vol 40 no. 4 (1997), pp. 799-816 [abs].
  • Bejan, A, Constructal tree network for fluid flow between a finite-size volume and one source or sink, International Journal of Thermal Sciences, vol 36 no. 8 (1997), pp. 592-604 [abs].
  • Bejan, A, How nature takes shape, Mechanical Engineering, vol 119 no. 10 (1997), pp. 90-92 [abs].
  • Bejan, A, Theory of organization in nature: Pulsating physiological processes, International Journal of Heat and Mass Transfer, vol 40 no. 9 (1997), pp. 2097-2104 [abs].
  • Bejan, A, The constructal law of structure formation in natural systems with internal flows, American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, vol 37 (1997), pp. 257-264 [abs].
  • Bejan Adrian, , Fundamental optima in thermal science, International Journal of Mechanical Engineering Education, vol 25 no. 1 (1997) [abs].
  • Fowler, AJ; Ledezma, GA; Bejan, A, Optimal geometric arrangement of staggered plates in forced convection, International Journal of Heat and Mass Transfer, vol 40 no. 8 (1997), pp. 1795-1805 [abs].
  • Ledezma, GA; Bejan, A; Errera, MR, Constructal tree networks for heat transfer, Journal of Applied Physics, vol 82 no. 1 (1997), pp. 89-100 [abs].
  • Ledezma, GA; Bejan, A, Optimal geometric arrangement of staggered vertical plates in natural convection, Journal of Heat Transfer: Transactions of the ASME, vol 119 no. 4 (1997), pp. 700-708 [abs].
  • Vargas, JVC; Bejan, A, Optimization of pulsating heating in pool boiling, Journal of Heat Transfer: Transactions of the ASME, vol 119 no. 2 (1997), pp. 298-304 [abs].
  • Basak, T; Rao, KK; Bejan, A, A model for heat transfer in a honey bee swarm, Chemical Engineering Science, vol 51 no. 3 (1996), pp. 387-400 [abs].
  • Bejan, A; Dan, N, Analogy between electrical machines and heat transfer-irreversible heat engines, International Journal of Heat and Mass Transfer, vol 39 no. 17 (1996), pp. 3659-3666 [10.1016/0017-9310(96)00029-4] [abs].
  • Bejan, A; Ledezma, GA, Thermodynamic optimization of cooling techniques for electronic packages, International Journal of Heat and Mass Transfer, vol 39 no. 6 (1996), pp. 1213-1221 [10.1016/0017-9310(95)00196-4] [abs].
  • Bejan, A, Street network theory of organization in nature, Journal of Advanced Transportation, vol 30 no. 2 (1996), pp. 85-107 [abs].
  • Bejan, A, Models of power plants that generate minimum entropy while operating at maximum power, American Journal of Physics, vol 64 no. 8 (1996), pp. 1054-1059 [abs].
  • Bejan, A, Maximum power from fluid flow, International Journal of Heat and Mass Transfer, vol 39 no. 6 (1996), pp. 1175-1181 [10.1016/0017-9310(95)00209-X] [abs].
  • Bejan, A, The equivalence of maximum power and minimum entropy generation rate in the optimization of power plants, Journal of Energy Resources Technology, Transactions of the ASME, vol 118 no. 2 (1996), pp. 98-101 [abs].
  • Bejan, A, Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes, Journal of Applied Physics, vol 79 no. 3 (1996), pp. 1191-1218 [abs].
  • Bejan, A, Method of entropy generation minimization, or modeling and optimization based on combined heat transfer and thermodynamics, International Journal of Thermal Sciences, vol 35 no. 418-419 (1996), pp. 637-646 [abs].
  • Bejan, A, Notes on the history of the method of entropy generation minimization (finite time thermodynamics), Journal of Non-Equilibrium Thermodynamics, vol 21 no. 3 (1996), pp. 239-242 [abs].
  • Craciunescu, O; Bejan, A; Cacuci, DG; Schütz, W, Time-dependent interaction between water at supercritical pressures and a hot surface, Numerical Heat Transfer; Part A: Applications, vol 30 no. 6 (1996), pp. 535-553 [abs].
  • Homentcovschi, D; Stanescu, G; Bejan, A, Cooling of a two-dimensional space with one or more streams making one or more passes, International Journal of Heat and Fluid Flow, vol 17 no. 1 (1996), pp. 78-88 [10.1016/0142-727X(95)00086-6] [abs].
  • Ledezma, G; Bejan, A, Heat sinks with sloped plate fins in natural and forced convection, International Journal of Heat and Mass Transfer, vol 39 no. 9 (1996), pp. 1773-1783 [10.1016/0017-9310(95)00297-9] [abs].
  • Ledezma, G; Morega, AM; Bejan, A, Optimal spacing between pin fins with impinging flow, Journal of Heat Transfer, vol 118 no. 3 (1996), pp. 570-577 [abs].
  • Stanescu, G; Fowler, AJ; Bejan, A, The optimal spacing of cylinders in free-stream cross-flow forced convection, International Journal of Heat and Mass Transfer, vol 39 no. 2 (1996), pp. 311-317 [10.1016/0017-9310(95)00122-P] [abs].
  • Vargas, JVC; Sokolov, M; Bejan, A, Thermodynamic optimization of solar-driven refrigerators, Journal of Solar Energy Engineering, vol 118 no. 2 (1996), pp. 130-135 [abs].
  • Bejan, A; Fowler, AJ; Stanescu, G, The optimal spacing between horizontal cylinders in a fixed volume cooled by natural convection, International Journal of Heat and Mass Transfer, vol 38 no. 11 (1995), pp. 2047-2055 [abs].
  • Bejan, A; Kim, SJ; Morega, AM; Lee, SW, Cooling of stacks of plates shielded by porous screens, International Journal of Heat and Fluid Flow, vol 16 no. 1 (1995), pp. 16-24 [abs].
  • Bejan, A; Vargas, JVC; Sokolov, M, Optimal allocation of a heat-exchanger inventory in heat driven refrigerators, International Journal of Heat and Mass Transfer, vol 38 no. 16 (1995), pp. 2997-3004 [abs].
  • Bejan, A, Optimal spacing for cylinders in crossflow forced convection, Journal of Heat Transfer, vol 117 no. 3 (1995), pp. 767-770 [abs].
  • Bejan, A, Convection heat transfer, second edition, Applied Mechanics Reviews, vol 48 no. 7 (1995) [abs].
  • Bejan, A, Theory of heat transfer-irreversible power plants-II. The optimal allocation of heat exchange equipment, International Journal of Heat and Mass Transfer, vol 38 no. 3 (1995), pp. 433-444 [abs].
  • Bejan, A, Heat transfer, second edition (1995) [abs].
  • Fowler, AJ; Bejan, A, Forced convection from a surface covered with flexible fibers, International Journal of Heat and Mass Transfer, vol 38 no. 5 (1995), pp. 767-777 [abs].
  • Morega, AM; Bejan, A; Lee, SW, Free stream cooling of a stack of parallel plates, International Journal of Heat and Mass Transfer, vol 38 no. 3 (1995), pp. 519-531 [abs].
  • Morega, AM; Vargas, JVC; Bejan, A, Optimization of pulsating heaters in forced convection, International Journal of Heat and Mass Transfer, vol 38 no. 16 (1995), pp. 2925-2934 [abs].
  • Radcenco, V; Vargas, JVC; Bejan, A; Lim, JS, Two design aspects of defrosting refrigerators, International Journal of Refrigeration, vol 18 no. 2 (1995), pp. 76-86 [abs].
  • Vargas, JVC; Bejan, A, Fundamentals of ice making by convection cooling followed by contact melting, International Journal of Heat and Mass Transfer, vol 38 no. 15 (1995), pp. 2833-2841 [abs].
  • Vargas, JVC; Bejan, A, Optimization principle for natural convection pulsating heating, Journal of Heat Transfer, vol 117 no. 4 (1995), pp. 942-947 [abs].
  • Vargas, JVC; Laursen, TA; Bejan, A, Nonsimilar solutions for mixed convection on a wedge embedded in a porous medium, International Journal of Heat and Fluid Flow, vol 16 no. 3 (1995), pp. 211-216 [10.1016/0142-727X(95)97182-R] [abs].
  • MOREGA, M; BEJAN, A, PLATE FINS WITH VARIABLE THICKNESS AND HEIGHT FOR AIR-COOLED ELECTRONIC MODULES, International Journal of Heat and Mass Transfer, vol 37 (1994), pp. 433-445 [10.1016/0017-9310(94)90043-4] [abs].
  • BEJAN, A; LEE, S, OPTIMAL GEOMETRY OF CONVECTION COOLED ELECTRONIC PACKAGES, NATO ASI series. Series E, Applied science, vol 258 (1994), pp. 277-291 [abs].
  • Bejan, A; Morega, AM, The optimal spacing of a stack of plates cooled by turbulent forced convection, International Journal of Heat and Mass Transfer, vol 37 no. 6 (1994), pp. 1045-1048 [abs].
  • Bejan, A; Vargas, JVC; Lim, JS, When to defrost a refrigerator, and when to remove the scale from the heat exchanger of a power plant, International Journal of Heat and Mass Transfer, vol 37 no. 3 (1994), pp. 523-532 [abs].
  • Bejan, A, Unanswered questions in heat transfer research: technological limitations in the characterization of heat transfer at interfaces, Winter Annual Meeting of the American Society of Mechanical Engineers (1994), pp. 3-4 [abs].
  • Bejan, A, Contact Melting Heat Transfer and Lubrication, Advances in Heat Transfer, vol 24 no. C (1994), pp. 1-38 [10.1016/S0065-2717(08)70231-4] [abs].
  • Fowler, AJ; Bejan, A, Correlation of optimal sizes of bodies with external forced convection heat transfer, International Communications in Heat and Mass Transfer, vol 21 no. 1 (1994), pp. 17-27 [abs].
  • Fowler, AJ; Bejan, A, Forced convection in banks of inclined cylinders at low Reynolds numbers, International Journal of Heat and Fluid Flow, vol 15 no. 2 (1994), pp. 90-99 [abs].
  • Lim, JS; Bejan, A, Two fundamental problems of refrigerator thermal insulation design, Heat Transfer Engineering, vol 15 no. 3 (1994), pp. 35-41 [abs].
  • Morega, AM; Bejan, A, Optimal spacing of parallel boards with discrete heat sources cooled by laminar forced convection, Numerical Heat Transfer; Part A: Applications, vol 25 no. 4 (1994), pp. 373-392 [abs].
  • Morega, AM; Bejan, A, Heatline visualization of forced convection in porous media, International Journal of Heat and Fluid Flow, vol 15 no. 1 (1994), pp. 42-47 [abs].
  • Morega, M; Bejan, A, Plate fins with variable thickness and height for air-cooled electronic modules, International Journal of Heat and Mass Transfer, vol 37 no. SUPPL. 1 (1994), pp. 433-445 [abs].
  • Vargas, JVC; Bejan, A; Dobrovicescu, A, The melting of an ice shell on a heated horizontal cylinder, Transactions - ASME: Journal of Heat Transfer, vol 116 no. 3 (1994), pp. 702-708 [abs].
  • LIM, J; FOWLER, A; BEJAN, A, SPACES FILLED WITH FLUID AND FIBERS COATED WITH A PHASE-CHANGE MATERIAL, Journal of Heat Transfer: Transactions of the ASME, vol 115 no. 4 (1993), pp. 1044-1050 [10.1115/1.2911359] [abs].
  • BEJAN, A; MOREGA, A, THERMAL CONTACT RESISTANCE BETWEEN 2 FLAT SURFACES THAT SQUEEZE A FILM OF LUBRICANT, Journal of Heat Transfer: Transactions of the ASME, vol 115 no. 3 (1993), pp. 763-767 [10.1115/1.2910749] [abs].
  • Bejan, A; Ahern, JE, Heat transfer, Applied Mechanics Reviews, vol 46 no. 3 (1993) [abs].
  • Bejan, A; Morega, AM; Lee, SW; Kim, SJ, The cooling of a heat-generating board inside a parallel-plate channel, International Journal of Heat and Fluid Flow, vol 14 no. 2 (1993), pp. 170-176 [abs].
  • Bejan, A; Morega, AM, Optimal arrays of pin fins and plate fins in laminar forced convection, TRANSACTIONS - ASME: JOURNAL OF HEAT TRANSFER, vol 115 no. 1 (1993), pp. 75-81 [abs].
  • Bejan, A, Power and refrigeration plants for minimum heat exchange inventory, Journal of Energy Resources Technology, Transactions of the ASME, vol 115 no. 2 (1993), pp. 148-150 [abs].
  • Bejan, A, How to distribute a finite amount of insulation on a wall with nonuniform temperature, International Journal of Heat and Mass Transfer, vol 36 no. 1 (1993), pp. 49-56 [abs].
  • Bejan, A, Comments on "Analysis of close-contact melting for octadecane and ice inside isothermally heated horizontal rectangular capsule", International Journal of Heat and Mass Transfer, vol 36 no. 3 (1993) [abs].
  • Fowler, AJ; Bejan, A, Contact melting during sliding on ice, International Journal of Heat and Mass Transfer, vol 36 no. 5 (1993), pp. 1171-1179 [abs].
  • Lage, JL; Bejan, A, The resonance of natural convection in an enclosure heated periodically from the side, International Journal of Heat and Mass Transfer, vol 36 no. 8 (1993), pp. 2027-2038 [abs].
  • Mereu, S; Sciubba, E; Bejan, A, The optimal cooling of a stack of heat generating boards with fixed pressure drop, flowrate or pumping power, International Journal of Heat and Mass Transfer, vol 36 no. 15 (1993), pp. 3677-3686 [abs].
  • Morega, AM; Bejan, A, Heatline visualization of forced convection laminar boundary layers, International Journal of Heat and Mass Transfer, vol 36 no. 16 (1993), pp. 3957-3966 [abs].
  • Morega, AM; Filip, AM; Bejan, A; Tyvand, PA, Melting around a shaft rotating in a phase-change material, International Journal of Heat and Mass Transfer, vol 36 no. 10 (1993), pp. 2499-2509 [abs].
  • Bejan, A; Sciubba, E, The optimal spacing of parallel plates cooled by forced convection, International Journal of Heat and Mass Transfer, vol 35 no. 12 (1992), pp. 3259-3264 [abs].
  • Bejan, A; Tyvand, PA, Pressure melting of ice under a body with flat base, Journal of Heat Transfer, vol 114 no. 2 (1992), pp. 529-531 [abs].
  • Bejan, A, Lubrication by close-contact melting, American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, vol 227 (1992), pp. 61-68 [abs].
  • Bejan, A, Single correlation for theoretical contact melting results in various geometries, International Communications in Heat and Mass Transfer, vol 19 no. 4 (1992), pp. 473-483 [abs].
  • Bejan, A, Comments on "Coupled heat and mass transfer by natural convection from vertical surfaces in porous media", International Journal of Heat and Mass Transfer, vol 35 no. 12 (1992) [abs].
  • Bejan Adrian, , Surfaces covered with hair. Optimal strand diameter and optimal porosity for minimum heat transfer, Biomimetics, vol 1 no. 1 (1992) [abs].
  • Lage, JL; Bejan, A; Anderson, R, Removal of contaminant generated by a discrete source in a slot ventilated enclosure, International Journal of Heat and Mass Transfer, vol 35 no. 5 (1992), pp. 1169-1180 [abs].
  • Lage, JL; Bejan, A; Georgiadis, JG, The Prandtl number effect near the onset of Bénard convection in a porous medium, International Journal of Heat and Fluid Flow, vol 13 no. 4 (1992), pp. 408-411 [abs].
  • Lage, JL; Lim, JS; Bejan, A, Natural convection with radiation in a cavity with open top end, Journal of Heat Transfer, vol 114 no. 2 (1992), pp. 479-486 [abs].
  • Lim, JS; Bejan, A; Kim, JH, Thermodynamic optimization of phase-change energy storage using two or more materials, Journal of Energy Resources Technology, Transactions of the ASME, vol 114 no. 1 (1992), pp. 84-90 [abs].
  • Lim, JS; Bejan, A; Kim, JH, Thermodynamics of energy extraction from fractured hot dry rock, International Journal of Heat and Fluid Flow, vol 13 no. 1 (1992), pp. 71-77 [abs].
  • Lim, JS; Bejan, A; Kim, JH, The optimal thickness of a wall with convection on one side, International Journal of Heat and Mass Transfer, vol 35 no. 7 (1992), pp. 1673-1679 [abs].
  • Lim, JS; Bejan, A, Prandtl number effect on melting dominated by natural convection, Journal of Heat Transfer, vol 114 no. 3 (1992), pp. 784-787 [abs].
  • Tyvand, PA; Bejan, A, Pressure melting of ice due to an embedded cylinder, Journal of Heat Transfer, vol 114 no. 2 (1992), pp. 532-535 [abs].
  • Bejan, A; Nield, DA, Transient forced convection near a suddenly heated plate in a porous medium, International Communications in Heat and Mass Transfer, vol 18 no. 1 (1991), pp. 83-91 [abs].
  • Bejan, A, Thermodynamics of an 'isothermal' flow: the two-dimensional turbulent jet, International Journal of Heat and Mass Transfer, vol 34 no. 2 (1991), pp. 407-413 [abs].
  • Bejan, A, Predicting the pool fire vortex shedding frequency, Journal of Heat Transfer, vol 113 no. 1 (1991), pp. 261-263 [abs].
  • Bejan, A, Film condensation on an upward facing plate with free edges, International Journal of Heat and Mass Transfer, vol 34 no. 2 (1991), pp. 578-582 [abs].
  • De Lucia, M; Bejan, A, Second law analysis of energy storage by melting, Soil Dynamics and Earthquake Engineering, vol 10 no. 1 (1991) [abs].
  • Fowler, AJ; Bejan, A, The effect of shrinkage on the cooking of meat, International Journal of Heat and Fluid Flow, vol 12 no. 4 (1991), pp. 375-383 [abs].
  • Gore, RA; Crowe, CT; Bejan, A, Experimental observations on transition to turbulence in confined coaxial jets and other boundary layer flows (1991) [abs].
  • Lage, JL; Bejan, A; Anderson, R, Efficiency of transient contaminant removal from a slot ventilated enclosure, International Journal of Heat and Mass Transfer, vol 34 no. 10 (1991), pp. 2603-2615 [abs].
  • Lage, JL; Bejan, A; Georgiadis, J, On the effect of the Prandtl number on the onset of Bénard convection, International Journal of Heat and Fluid Flow, vol 12 no. 2 (1991), pp. 184-188 [abs].
  • Lage, JL; Bejan, A, Natural convection from a vertical surface covered with hair, International Journal of Heat and Fluid Flow, vol 12 no. 1 (1991), pp. 46-53 [abs].
  • Lage, JL; Bejan, A, Ra-Pr domain of laminar natural convection in an enclosure heated from the side, Numerical Heat Transfer; Part A: Applications, vol 19 no. 1 (1991), pp. 21-41 [abs].
  • Litsek, PA; Zhang, Z; Bejan, A, Convection in the cavity between two rollers: the effect of thermal boundary conditions, Journal of Heat Transfer, vol 113 no. 1 (1991), pp. 249-251 [abs].
  • Lucia, MD; Bejan, A, Thermodynamics of phase-change energy storage. The effects of liquid superheating during melting, and irreversibility during solidification, Journal of Solar Energy Engineering, Transactions of the ASME, vol 113 no. 1 (1991), pp. 2-10 [abs].
  • Zhang, Z; Bejan, A; Lage, JL, Natural convection in a vertical enclosure with internal permeable screen, Journal of Heat Transfer, vol 113 no. 2 (1991), pp. 377-383 [abs].
  • DELUCIA, M; BEJAN, A, THERMODYNAMICS OF ENERGY-STORAGE BY MELTING DUE TO CONDUCTION OR NATURAL-CONVECTION, Journal of Solar Energy Engineering, vol 112 no. 2 (1990), pp. 110-116 [10.1115/1.2929642] [abs].
  • Bejan, A; Lage, JL, Prandtl number effect on the transition in natural convection along a vertical surface, Journal of Heat Transfer, vol 112 no. 3 (1990), pp. 787-790 [abs].
  • Bejan, A; Zhang, Z; Jany, P, The horizontal intrusion layer of melt in a saturated porous medium, International Journal of Heat and Fluid Flow, vol 11 no. 4 (1990), pp. 284-289 [abs].
  • Bejan, A, Theory of heat transfer from a surface covered with hair, Journal of Heat Transfer, vol 112 no. 3 (1990), pp. 662-667 [abs].
  • Bejan, A, Optimum hair strand diameter for minimum free-convection heat transfer from a surface covered with hair, International Journal of Heat and Mass Transfer, vol 33 no. 1 (1990), pp. 206-209 [abs].
  • Gore, RA; Crowe, CT; Bejan, A, The geometric similarity of the laminar sections of boundary layer-type flows, International Communications in Heat and Mass Transfer, vol 17 no. 4 (1990), pp. 465-475 [abs].
  • Gore, RA; Crowe, CT; Bejan, A, Experimental observations on transition to turbulence in confined coaxial jets and other boundary layer flows, American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, vol 94 (1990), pp. 79-83 [abs].
  • Gore, RA; Crowe, CT; Bejan, A, Experimental observations on transition to turbulence in confined coaxial jets and other boundary layer flows (1990) [abs].
  • Lage, JL; Bejan, A, Numerical study of forced convection near a surface covered with hair, International Journal of Heat and Fluid Flow, vol 11 no. 3 (1990), pp. 242-248 [abs].
  • Lage, JL; Bejan, A, Convection from a periodically stretching plane wall, Journal of Heat Transfer, vol 112 no. 1 (1990), pp. 92-99 [abs].
  • Litsek, PA; Bejan, A, Sliding contact melting. The effect of heat transfer in the solid parts, Journal of Heat Transfer, vol 112 no. 3 (1990), pp. 808-812 [abs].
  • Litsek, PA; Bejan, A, Convection in the cavity formed between two cylindrical rollers, Journal of Heat Transfer, vol 112 no. 3 (1990), pp. 625-631 [abs].
  • Trevisan, OV; Bejan, A, Combined Heat and Mass Transfer by Natural Convection in a Porous Medium, Advances in Heat Transfer, vol 20 no. C (1990), pp. 315-352 [10.1016/S0065-2717(08)70029-7] [abs].
  • Zhang, Z; Bejan, A, Solidification in the presence of high Rayleigh number convection in an enclosure cooled from the side, International Journal of Heat and Mass Transfer, vol 33 no. 4 (1990), pp. 661-671 [abs].
  • Bejan, A; Jones, JA, Buckling flows. Exploring the origins and structure of turbulence, Mechanical Engineering, vol 111 no. 11 (1989), pp. 70-74 [abs].
  • Bejan, A; Litsek, PA, The contact heating and lubricating flow of a body of glass, International Journal of Heat and Mass Transfer, vol 32 no. 4 (1989), pp. 751-760 [abs].
  • Bejan, A, Theory of rolling contact heat transfer, Journal of Heat Transfer, vol 111 no. 2 (1989), pp. 257-263 [abs].
  • Bejan, A, Theory of melting with natural convection in an enclosed porous medium, Journal of Heat Transfer, vol 111 no. 2 (1989), pp. 407-415 [abs].
  • Bejan, A, Minimizing entropy in thermal systems, Mechanical Engineering, vol 111 no. 8 (1989), pp. 88-91 [abs].
  • Bejan, A, Analysis of melting by natural convection in an enclosure, International Journal of Heat and Fluid Flow, vol 10 no. 3 (1989), pp. 245-252 [abs].
  • Bejan, A, Theory of heat transfer-irreversible refrigeration plants, International Journal of Heat and Mass Transfer, vol 32 no. 9 (1989), pp. 1631-1639 [abs].
  • Bejan, A, Fundamentals of sliding contact melting and friction, Journal of Heat Transfer, vol 111 no. 1 (1989), pp. 13-20 [abs].
  • Trevisan, OV; Bejan, A, Mass and heat transfer by natural convection above a concentrated source buried at the base of a shallow porous layer, American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, vol 82 (1989), pp. 47-54 [abs].
  • Zongqin, Z; Bejan, A, The problem of time-dependent natural convection melting with conduction in the solid, International Journal of Heat and Mass Transfer, vol 32 no. 12 (1989), pp. 2447-2457 [abs].
  • Zongqin, Z; Bejan, A, Melting in an enclosure heated at constant rate, International Journal of Heat and Mass Transfer, vol 32 no. 6 (1989), pp. 1063-1076 [abs].
  • Bejan, A, SECOND LOOK AT THE SECOND LAW., Mechanical Engineering, vol 110 no. 5 (1988), pp. 58-65 [abs].
  • Bejan, A, The process of melting by rolling contact, International Journal of Heat and Mass Transfer, vol 31 no. 11 (1988), pp. 2273-2283 [abs].
  • Bejan, A, HEAT TRANSFER-BASED RECONSTRUCTION OF THE CONCEPTS AND LAWS OF CLASSICAL THERMODYNAMICS., Journal of Heat Transfer, vol 110 no. 1 (1988), pp. 243-249 [abs].
  • Bejan, A, Modern trends in engineering thermodynamics, American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, vol 6 (1988), pp. 1-7 [abs].
  • Bejan, A, Theory of heat transfer-irreversible power plants, International Journal of Heat and Mass Transfer, vol 31 no. 6 (1988), pp. 1211-1219 [abs].
  • Bejan, A, Research into the origins of engineering thermodynamics, International Communications in Heat and Mass Transfer, vol 15 no. 5 (1988), pp. 571-580 [abs].
  • Bejan, A, Blending geometry with numerical computation: Charts for the enthalpy, absolute entropy, and flow exergy of 12 gases at low pressures, International Journal of Heat and Fluid Flow, vol 9 no. 2 (1988), pp. 251-253 [abs].
  • Beloff, PS; Bejan, A; Campo, A, Transient natural convection heat transfer in a large-diameter cylinder, Experimental Thermal and Fluid Science, vol 1 no. 3 (1988), pp. 267-274 [abs].
  • Hall, JD; Bejan, A; Chaddock, JB, Transient natural convection in a rectangular enclosure with one heated side wall, International Journal of Heat and Fluid Flow, vol 9 no. 4 (1988), pp. 396-404 [abs].
  • Jany, P; Bejan, A, Ernst Schmidt's approach to fin optimization: an extension to fins with variable conductivity and the design of ducts for fluid flow, International Journal of Heat and Mass Transfer, vol 31 no. 8 (1988), pp. 1635-1644 [abs].
  • Jany, P; Bejan, A, SCALES OF MELTING IN THE PRESENCE OF NATURAL CONVECTION IN A RECTANGULAR CAVITY FILLED WITH POROUS MEDIUM., Journal of Heat Transfer, vol 110 no. 2 (1988), pp. 526-529 [abs].
  • Jany, P; Bejan, A, Scaling theory of melting with natural convection in an enclosure, International Journal of Heat and Mass Transfer, vol 31 no. 6 (1988), pp. 1221-1235 [abs].
  • Litsek, PA; Bejan, A, TRANSIENT NATURAL CONVECTION BETWEEN TWO ZONES IN AN INSULATED ENCLOSURE., Journal of Heat Transfer, vol 110 no. 1 (1988), pp. 116-125 [abs].
  • Bejan, A, Second law aspects of solar energy conversion, Solar Energy Utilization. Proceedings of the NATO Advanced Study Institute (1987), pp. 145-187 [abs].
  • Bejan, A, UNIFICATION OF THREE DIFFERENT THEORIES CONCERNING THE IDEAL CONVERSION OF ENCLOSED RADIATION., Journal of Solar Energy Engineering, Transactions of the ASME, vol 109 no. 1 (1987), pp. 46-51 [abs].
  • Bejan, A, BASIC SCALES OF NATURAL CONVECTION HEAT AND MASS TRANSFER IN FLUIDS AND FLUID-SATURATED POROUS MEDIA., International Communications in Heat and Mass Transfer, vol 14 no. 2 (1987), pp. 107-123 [abs].
  • Bejan, A, The thermodynamic design of heat and mass transfer processes and devices, International Journal of Heat and Fluid Flow, vol 8 no. 4 (1987), pp. 258-276 [abs].
  • Bejan, A, BUCKLING FLOWS: A NEW FRONTIER IN FLUID MECHANICS., Annu Rev Numer Fluid Mech Heat Transfer, vol 1 (1987), pp. 262-304 [abs].
  • Bejan, A, STRESSING THE 'FREE' IN FREE CONVECTION RESEARCH: THE BASIC SCALES OF HEAT AND MASS TRANSFER IN FLUIDS AND FLUID-SATURATED POROUS MEDIA., vol 2 (1987), pp. 195-202 [abs].
  • Bejan, A, Letter to the editors, International Journal of Heat and Fluid Flow, vol 8 no. 3 (1987) [abs].
  • Trevisan, OV; Bejan, A, COMBINED HEAT AND MASS TRANSFER BY NATURAL CONVECTION IN A VERTICAL ENCLOSURE., Journal of Heat Transfer, vol 109 no. 1 (1987), pp. 104-112 [abs].
  • Trevisan, OV; Bejan, A, Mass and heat transfer by high Rayleigh number convection in a porous medium heated from below, International Journal of Heat and Mass Transfer, vol 30 no. 11 (1987), pp. 2341-2356 [abs].
  • Wang, M; Bejan, A, Heat transfer correlation for benard convection in a fluid saturated porous layer, International Communications in Heat and Mass Transfer, vol 14 no. 6 (1987), pp. 617-626 [abs].
  • Zongqin, Z; Bejan, A, The horizontal spreading of thermal and chemical deposits in a porous medium, International Journal of Heat and Mass Transfer, vol 30 no. 11 (1987), pp. 2289-2303 [abs].
  • Anand, A; Bejan, A, TRANSITION TO MEANDERING RIVULET FLOW IN VERTICAL PARALLEL-PLATE CHANNELS., Journal of Fluids Engineering, Transactions of the ASME, vol 108 no. 2 (1986), pp. 269-272 [abs].
  • Lankford, KE; Bejan, A, NATURAL CONVECTION IN A VERTICAL ENCLOSURE FILLED WITH WATER NEAR 4 degree C., Journal of Heat Transfer, vol 108 no. 4 (1986), pp. 755-763 [abs].
  • Poulikakos, D; Bejan, A; Selimos, B; Blake, KR, High Rayleigh number convection in a fluid overlaying a porous bed, International Journal of Heat and Fluid Flow, vol 7 no. 2 (1986), pp. 109-116 [abs].
  • Trevisan, OV; Bejan, A, CONVECTION DRIVEN BY THE NONUNIFORM ABSORPTION OF THERMAL RADIATION AT THE FREE SURFACE OF A STAGNANT POOL., Numerical heat transfer, vol 10 no. 5 (1986), pp. 483-506 [abs].
  • Trevisan, OV; Bejan, A, Mass and heat transfer by natural convection in a vertical slot filled with porous medium, International Journal of Heat and Mass Transfer, vol 29 no. 3 (1986), pp. 403-415 [abs].
  • Anderson, R; Bejan, A, INSTABILITY OF A ROUND JET SURROUNDED BY AN ANNULAR SHEAR LAYER., Journal of Fluids Engineering, Transactions of the ASME, vol 107 no. 2 (1985), pp. 258-263 [abs].
  • Anderson, R; Bejan, A, The instability of a round jet surrounded by an annular shear layer., TRANS. ASME J. FLUIDS ENGNG., vol 107 no. 2 , Jun. 1985 (1985), pp. 258-263 [abs].
  • Bejan, A; Khair, KR, Heat and mass transfer by natural convection in a porous medium, International Journal of Heat and Mass Transfer, vol 28 no. 5 (1985), pp. 909-918 [abs].
  • Bejan, A, Mass and heat transfer by natural convection in a vertical cavity, International Journal of Heat and Fluid Flow, vol 6 no. 3 (1985), pp. 149-159 [abs].
  • Bejan, A, METHOD OF SCALE ANALYSIS: NATURAL CONVECTION IN POROUS MEDIA. (1985), pp. 548-572 [abs].
  • Bejan, A, METHOD OF SCALE ANALYSIS: NATURAL CONVECTION IN FLUIDS. (1985), pp. 75-94 [abs].
  • Chelghoum, DE; Bejan, A, SECOND-LAW ANALYSIS OF SOLAR COLLECTORS WITH ENERGY STORAGE CAPABILITY., Journal of Solar Energy Engineering, Transactions of the ASME, vol 107 no. 3 (1985), pp. 244-251 [abs].
  • Khair, KR; Bejan, A, MASS TRANSFER TO NATURAL CONVECTION BOUNDARY LAYER FLOW DRIVEN BY HEAT TRANSFER., Journal of Heat Transfer, vol 107 no. 4 (1985), pp. 979-981 [abs].
  • Kimura, S; Bejan, A; Pop, I, NATURAL CONVECTION NEAR A COLD PLATE FACING UPWARD IN A POROUS MEDIUM., Journal of Heat Transfer, vol 107 no. 4 (1985), pp. 819-825 [abs].
  • Kimura, S; Bejan, A, NATURAL CONVECTION IN A STABLY HEATED CORNER FILLED WITH POROUS MEDIUM., Journal of Heat Transfer, vol 107 no. 2 (1985), pp. 293-298 [abs].
  • Kimura, S; Bejan, A, Natural convection in a differentially heated corner region, Physics of Fluids, vol 28 no. 10 (1985), pp. 2980-2989 [abs].
  • Poulikakos, D; Bejan, A, The departure from Darcy flow in natural convection in a vertical porous layer, Physics of Fluids, vol 28 no. 12 (1985), pp. 3477-3484 [abs].
  • Trevisan, OV; Bejan, A, Natural convection with combined heat and mass transfer buoyancy effects in a porous medium, International Journal of Heat and Mass Transfer, vol 28 no. 8 (1985), pp. 1597-1611 [abs].
  • Bejan, A; Poulikakos, D, The nondarcy regime for vertical boundary layer natural convection in a porous medium, International Journal of Heat and Mass Transfer, vol 27 no. 5 (1984), pp. 717-722 [abs].
  • Bejan, A, SECOND-LAW ASPECTS OF HEAT TRANSFER ENGINEERING. (1984), pp. 1-22 [abs].
  • Blake, KR; Bejan, A; Poulikakos, D, NATURAL CONVECTION NEAR 4 degree C IN A WATER SATURATED POROUS LAYER HEATED FROM BELOW., International Journal of Heat and Mass Transfer, vol 27 no. 2 (1984), pp. 2355-2364 [abs].
  • Blake, KR; Bejan, A; Poulikakos, D, Natural convection near 4°C in a water saturated porous layer heated from below, International Journal of Heat and Mass Transfer, vol 27 no. 12 (1984), pp. 2355-2364 [abs].
  • Blake, KR; Bejan, A, EXPERIMENTS ON THE BUCKLING OF THIN FLUID LAYERS UNDERGOING END-COMPRESSION., Journal of Fluids Engineering, Transactions of the ASME, vol 106 no. 1 (1984), pp. 74-78 [abs].
  • Blake, KR; Poulikakos, D; Bejan, A, NATURAL CONVECTION NEAR 4 degree C IN A HORIZONTAL WATER LAYER HEATED FROM BELOW., Physics of Fluids, vol 27 no. 11 (1984), pp. 2608-2616 [10.1063/1.864561] [abs].
  • Kimura, S; Bejan, A, BOUNDARY LAYER NATURAL CONVECTION REGIME IN A RECTANGULAR CAVITY WITH UNIFORM HEAT FLUX FROM THE SIDE., Journal of Heat Transfer, vol 106 no. 1 (1984), pp. 98-103 [abs].
  • Poulikakos, D; Bejan, A, Penetrative convection in porous medium bounded by a horizontal wall with hot and cold spots, International Journal of Heat and Mass Transfer, vol 27 no. 10 (1984), pp. 1749-1757 [abs].
  • Poulikakos, D; Bejan, A, Natural convection in a porous layer heated and cooled along one vertical side, International Journal of Heat and Mass Transfer, vol 27 no. 10 (1984), pp. 1879-1891 [abs].
  • Anderson, R; Bejan, A, Buckling of a turbulent jet surrounded by a highly flexible duct, Physics of Fluids, vol 26 no. 11 (1983), pp. 3193-3200 [abs].
  • Bejan, A; Anderson, R, NATURAL CONVECTION AT THE INTERFACE BETWEEN A VERTICAL POROUS LAYER AND AN OPEN SPACE., Journal of Heat Transfer, vol 105 no. 1 (1983), pp. 124-129 [abs].
  • Bejan, A; Cunnington, GR, Theoretical considerations of transition to turbulance in natural convection near a vertical wall, International Journal of Heat and Fluid Flow, vol 4 no. 3 (1983), pp. 131-139 [abs].
  • Bejan, A, NATURAL CONVECTION HEAT TRANSFER IN A POROUS LAYER WITH INTERNAL FLOW OBSTRUCTIONS., International Journal of Heat and Mass Transfer, vol 26 no. 6 (1983), pp. 815-822 [abs].
  • Bejan, A, BOUNDARY LAYER REGIME IN A POROUS LAYER WITH UNIFORM HEAT FLUX FROM THE SIDE., International Journal of Heat and Mass Transfer, vol 26 no. 9 (1983), pp. 1339-1346 [abs].
  • KIMURA, S; BEJAN, A, THE HEATLINE VISUALIZATION OF CONVECTIVE HEAT-TRANSFER, Journal of Heat Transfer: Transactions of the ASME, vol 105 no. 4 (1983), pp. 916-919 [abs].
  • Kimura, S; Bejan, A, BUCKLING OF A VERTICAL LIQUID COLUMN., Journal of Fluids Engineering, Transactions of the ASME, vol 105 no. 4 (1983), pp. 469-473 [abs].
  • Kimura, S; Bejan, A, MECHANISM FOR TRANSITION TO TURBULENCE IN BUOYANT PLUME FLOW., International Journal of Heat and Mass Transfer, vol 26 no. 10 (1983), pp. 1515-1532 [abs].
  • Lin, NN; Bejan, A, NATURAL CONVECTION IN A PARTIALLY DIVIDED ENCLOSURE., International Journal of Heat and Mass Transfer, vol 26 no. 12 (1983), pp. 1867-1878 [abs].
  • Poulikakos, D; Bejan, A, Unsteady natural convection in a porous layer, Physics of Fluids, vol 26 no. 5 (1983), pp. 1183-1191 [abs].
  • Poulikakos, D; Bejan, A, NATURAL CONVECTION EXPERIMENTS IN A TRIANGULAR ENCLOSURE., Journal of Heat Transfer, vol 105 no. 3 (1983), pp. 652-655 [abs].
  • Poulikakos, D; Bejan, A, NUMERICAL STUDY OF TRANSIENT HIGH RAYLEIGH NUMBER CONVECTION IN AN ATTIC-SHAPED POROUS LAYER., Journal of Heat Transfer, vol 105 no. 3 (1983), pp. 476-484 [abs].
  • Poulikakos, D; Bejan, A, FLUID DYNAMICS OF AN ATTIC SPACE., Journal of Fluid Mechanics, vol 131 (1983), pp. 251-269 [abs].
  • Poulikakos, D; Bejan, A, NATURAL CONVECTION IN VERTICALLY AND HORIZONTALLY LAYERED POROUS MEDIA HEATED FROM THE SIDE., International Journal of Heat and Mass Transfer, vol 26 no. 12 (1983), pp. 1805-1814 [abs].
  • Schultz, W; Bejan, A, Exergy conservation in parallel thermal insulation systems, International Journal of Heat and Mass Transfer, vol 26 no. 3 (1983), pp. 335-340 [abs].
  • Bejan, A; Poulikakos, D, NATURAL CONVECTION IN AN ATTIC-SHAPED SPACE FILLED WITH POROUS MATERIAL., Journal of Heat Transfer, vol 104 no. 2 (1982), pp. 241-247 [abs].
  • Bejan, A; Schultz, W, Optimum flowrate history for cooldown and energy storage processes, International Journal of Heat and Mass Transfer, vol 25 no. 8 (1982), pp. 1087-1092 [abs].
  • Bejan, A, Theory of instantaneous sinuous structure in turbulent buoyant plumes, Heat and Mass Transfer: Waerme- und Stoffuebertragung, vol 16 no. 4 (1982), pp. 237-242 [10.1007/BF01375648] [abs].
  • Bejan, A, SECOND-LAW ANALYSIS IN HEAT TRANSFER AND THERMAL DESIGN., Advances in Heat Transfer, vol 15 (1982), pp. 1-58 [abs].
  • Bejan, A, Extraction of exergy from solar collectors under time-varying conditions, International Journal of Heat and Fluid Flow, vol 3 no. 2 (1982), pp. 67-72 [abs].
  • Bejan, A, Theoretical explanation for the incipient formation of meanders in straight rivers., Geophysical Research Letters, vol 9 no. 8 (1982), pp. 831-834 [abs].
  • Bejan, A, The meandering fall of paper ribbons, Physics of Fluids, vol 25 no. 5 (1982), pp. 741-742 [abs].
  • Bejan, M; Bejan, A, A supply-side approach to energy policy, Energy Policy, vol 10 no. 2 (1982), pp. 153-157 [abs].
  • POULIKAKOS, D; BEJAN, A, FIN GEOMETRY FOR MINIMUM ENTROPY GENERATION IN FORCED-CONVECTION, Journal of Heat Transfer: Transactions of the ASME, vol 104 no. 4 (1982), pp. 616-623 [abs].
  • POULIKAKOS, D; BEJAN, A, FIN GEOMETRY FOR MINIMUM ENTROPY GENERATION IN FORCED CONVECTION., J HEAT TRANSFER TRANS ASME, vol V 104 no. N 4 (1982), pp. 616-623 [abs].
  • Stockman, MG; Bejan, A, The nonaxisymmetric (buckling) flow regime of fast capillary jets, Physics of Fluids, vol 25 no. 9 (1982), pp. 1506-1511 [abs].
  • YEWELL, R; POULIKAKOS, D; BEJAN, A, TRANSIENT NATURAL-CONVECTION EXPERIMENTS IN SHALLOW ENCLOSURES, Journal of Heat Transfer: Transactions of the ASME, vol 104 no. 3 (1982), pp. 533-538 [abs].
  • YEWELL, R; POULIKAKOS, D; BEJAN, A, TRANSIENT NATURAL CONVECTION EXPERIMENTS IN SHALLOW ENCLOSURES., J HEAT TRANSFER TRANS ASME, vol V 104 no. N 3 (1982), pp. 533-538 [abs].
  • Anderson, R; Bejan, A, Heat transfer through single and double vertical walls in natural convection: Theory and experiment, International Journal of Heat and Mass Transfer, vol 24 no. 10 (1981), pp. 1611-1620 [abs].
  • Bejan, A; Al-Homoud, AA; Imberger, J, EXPERIMENTAL STUDY OF HIGH-RAYLEIGH-NUMBER CONVECTION IN A HORIZONTAL CAVITY WITH DIFFERENT END TEMPERATURES., Journal of Fluid Mechanics, vol 109 (1981), pp. 283-299 [abs].
  • Bejan, A; Anderson, R, Heat transfer across a vertical impermeable partition imbedded in porous medium, International Journal of Heat and Mass Transfer, vol 24 no. 7 (1981), pp. 1237-1245 [abs].
  • Bejan, A; Kearney, DW; Kreith, F, SECOND LAW ANALYSIS AND SYNTHESIS OF SOLAR COLLECTOR SYSTEMS., Journal of Solar Energy Engineering, Transactions of the ASME, vol 103 no. 1 (1981), pp. 23-28 [abs].
  • Bejan, A; Kimura, S, PENETRATION OF FREE CONVECTION INTO A LATERAL CAVITY., Journal of Fluid Mechanics, vol 103 (1981), pp. 465-478 [abs].
  • Bejan, A; Rossie, AN, NATURAL CONVECTION IN HORIZONTAL DUCT CONNECTING TWO FLUID RESERVOIRS., Journal of Heat Transfer, vol 103 no. 1 (1981), pp. 108-113 [abs].
  • Bejan, A, Comments on "Viscous buckling of thin fluid layers", Physics of Fluids, vol 24 no. 9 (1981), pp. 1764-1765 [abs].
  • Bejan, A, On the buckling property of inviscid jets and the origin of turbulence, Letters in heat and mass transfer, vol 8 no. 3 (1981), pp. 187-194 [abs].
  • Bejan, A, LATERAL INTRUSION OF NATURAL CONVECTION INTO A HORIZONTAL POROUS STRUCTURE., Journal of Heat Transfer, vol 103 no. 2 (1981), pp. 237-241 [abs].
  • Bejan, A, Reply to "comments on 'a synthesis of analytical results for natural convection heat transfer across rectangular enclosures'", International Journal of Heat and Mass Transfer, vol 24 no. 9 (1981), pp. 1557-1558 [abs].
  • Anderson, R; Bejan, A, NATURAL CONVECTION ON BOTH SIDES OF A VERTICAL WALL SEPARATING FLUIDS AT DIFFERENT TEMPERATURES., Journal of Heat Transfer, vol 102 no. 4 (1980), pp. 630-635 [abs].
  • Bejan, A; Jr, PAP, Evaluation of heat transfer augmentation techniques based on their impact on entropy generation, Letters in heat and mass transfer, vol 7 no. 2 (1980), pp. 97-106 [abs].
  • Bejan, A; Yewell, RB, EFFECT OF HYDROGEN BUBBLES ON THE THYMOL BLUE VELOCITY MEASUREMENT TECHNIQUE., International Journal of Heat and Fluid Flow, vol 2 no. 4 (1980), pp. 201-204 [10.1016/0142-727X(80)90014-4] [abs].
  • Bejan, A, Natural convection in a vertical cylindrical well filled with porous medium, International Journal of Heat and Mass Transfer, vol 23 no. 5 (1980), pp. 726-729 [abs].
  • Bejan, A, A synthesis of analytical results for natural convection heat transfer across rectangular enclosures, International Journal of Heat and Mass Transfer, vol 23 no. 5 (1980), pp. 723-726 [abs].
  • Kimura, S; Bejan, A, Numerical study of natural circulation in a horizontal duct with different end-temperatures, Heat and Mass Transfer: Waerme- und Stoffuebertragung, vol 14 no. 4 (1980), pp. 269-280 [10.1007/BF01618358] [abs].
  • Kumura, S; Bejan, A, EXPERIMENTAL STUDY OF NATURAL CONVECTION IN A HORIZONTAL CYLINDER WITH DIFFERENT END TEMPERATURES., International Journal of Heat and Mass Transfer, vol 23 no. 8 (1980), pp. 1117-1126 [10.1016/0017-9310(80)90176-3] [abs].
  • Oullette, WR; Bejan, A, Conservation of available work (exergy) by using promoters of swirl flow in forced convection heat transfer, Energy, vol 5 no. 7 (1980), pp. 587-596 [abs].
  • Bejan, A; Chang-Lin, T, Natural convection in horizontal space bounded by two concentric cylinders with different end temperatures, International Journal of Heat and Mass Transfer, vol 22 no. 6 (1979), pp. 919-927 [abs].
  • Bejan, A; Imberger, J, HEAT TRANSFER BY FORCED AND FREE CONVECTION IN A HORIZONTAL CHANNEL WITH DIFFERENTIALLY HEATED ENDS., Journal of Heat Transfer, vol 101 no. 3 (1979), pp. 417-421 [abs].
  • Bejan, A, On the boundary layer regime in a vertical enclosure filled with a porous medium, Letters in heat and mass transfer, vol 6 no. 2 (1979), pp. 93-102 [abs].
  • Bejan, A, NOTE ON GILL'S SOLUTION FOR FREE CONVECTION IN A VERTICAL ENCLOSURE., J Fluid Mech, vol 90 no. pt 3 (1979), pp. 561-568 [abs].
  • Bejan, A, SECOND LAW ANALYSIS IN HEAT TRANSFER., Energy, vol 5 no. 8-9 (1979), pp. 721-732 [abs].
  • Bejan, A, A general variational principle for thermal insulation system design, International Journal of Heat and Mass Transfer, vol 22 no. 2 (1979), pp. 219-228 [abs].
  • Bejan, A, STUDY OF ENTROPY GENERATION IN FUNDAMENTAL CONVECTIVE HEAT TRANSFER., Journal of Heat Transfer, vol 101 no. 4 (1979), pp. 718-725 [abs].
  • Kreith, F; Kearney, D; Bejan, A, END-USE MATCHING OF SOALR ENERGY SYSTEMS., Energy, vol 5 no. 8-9 (1979), pp. 875-890 [abs].
  • BEJAN, A; TIEN, C, LAMINAR FREE CONVECTION HEAT-TRANSFER THROUGH HORIZONTAL DUCT CONNECTING 2 FLUID RESERVOIRS AT DIFFERENT TEMPERATURES, Journal of Heat Transfer: Transactions of the ASME, vol 100 no. 4 (1978), pp. 725-727 [abs].
  • Bejan, A; Tien, CL, Effect of axial conduction and metal-helium heat transfer on the local stability of superconducting composite media, Cryogenics, vol 18 no. 7 (1978), pp. 433-441 [abs].
  • Bejan, A; Tien, CL, Fully developed natural counterflow in a long horizontal pipe with different end temperatures, International Journal of Heat and Mass Transfer, vol 21 no. 6 (1978), pp. 701-708 [abs].
  • Bejan, A; Tien, CL, LAMINAR NATURAL CONVECTION HEAT TRANSFER IN A HORIZONTAL CAVITY WITH DIFFERENT END TEMPERATURES., J Heat Transfer Trans ASME, vol 100 no. 4 (1978), pp. 641-647 [abs].
  • Bejan, A; Tien, CL, NATURAL CONVECTION IN A HORIZONTAL POROUS MEDIUM SUBJECTED TO AN END-TO-END TEMPERATURE DIFFERENCE., Journal of Heat Transfer, vol 100 no. 2 (1978), pp. 191-198 [abs].
  • Bejan, A; Tien, CL, Fully developed natural counterflow in a long horizontal pipe with different end temperatures., International Journal of Heat and Mass Transfer, vol 21 no. 6 , June 1978 (1978) [abs].
  • Bejan, A, NATURAL CONVECTION IN AN INFINITE POROUS MEDIUM WITH A CONCENTRATED HEAT SOURCE., Journal of Fluid Mechanics, vol 89 no. pt 1 (1978), pp. 97-107 [abs].
  • Bejan, A, General criterion for rating heat-exchanger performance, International Journal of Heat and Mass Transfer, vol 21 no. 5 (1978), pp. 655-658 [abs].
  • Bejan, A, TWO THERMODYNAMIC OPTIMA IN THE DESIGN OF SENSIBLE HEAT UNITS FOR ENERGY STORAGE., J Heat Transfer Trans ASME, vol 100 no. 4 (1978), pp. 708-712 [abs].
  • Bejan, A; Tien, CL, TRANSIENT BEHAVIOR OF NORMAL ZONES IN ONE-DIMENSIONAL COMPOSITE SUPERCONDUCTORS., American Society of Mechanical Engineers (Paper) no. 77 -HT-74 (1977) [abs].
  • Bejan, A, CONCEPT OF IRREVERSIBILITY IN HEAT EXCHANGER DESIGN: COUNTERFLOW HEAT EXCHANGERS FOR GAS-TO-GAS APPLICATIONS., Journal of Heat Transfer, vol 99 Ser C no. 3 (1977), pp. 374-380 [abs].
  • Bejan, A, The concept of irreversibility in heat exchanger design: counterflow heat exchangers for gas-to-gas applications, Trans. ASME, C, J. Heat Transf. (USA), vol 99 no. 3 (1977), pp. 374-380 [abs].
  • Bejan, A, Refrigerator-recirculator systems for large forced-cooled superconducting magnets, Cryogenics, vol 17 no. 2 (1977), pp. 97-105 [abs].
  • Bejan, A, TRANSIENT HEAT CONDUCTION IN CRYOGENIC CURRENT CABLES FOLLOWING A LOSS-OF-COOLANT ACCIDENT., Journal of Heat Transfer, vol 99 Ser C no. 4 (1977), pp. 689-691 [abs].
  • Bejan, A; Hoenig, MO, METHOD FOR ESTIMATING THE REFRIGERATION COSTS OF SUPERCRITICAL HELIUM COOLED CABLE SUPERCONDUCTORS., IEEE Transactions on Magnetics, vol MAG-13 no. 1 (1976), pp. 686-689 [abs].
  • Bejan, A; Jr, EMC, Criterion for burn-up conditions in gas-cooled cryogenic current leads, Cryogenics, vol 16 no. 9 (1976), pp. 515-518 [abs].
  • Bejan, A; Thullen, P, THERMAL PERFORMANCE OF THE ROTOR OF THE MIT-EPRI 3 MVA SUPERCONDUCTING ALTERNATOR., IEEE Transactions on Magnetics, vol MAG-13 no. 1 (1976), pp. 763-766 [abs].
  • Bejan, A, Refrigeration for rotating superconducting windings of large ac electric machines, Cryogenics, vol 16 no. 3 (1976), pp. 153-159 [abs].
  • Bejan, A, REFRIGERATION FOR FORCED-COOLED LARGE SUPERCONDUCTING MAGNETS., American Society of Mechanical Engineers (Paper) no. 76 -WA/PID-4 (1976) [abs].
  • Hoenig, MO; Iwasa, Y; Montgomery, DB; Bejan, A, CRYOSTABILIZED SINGLE-PHASE HELIUM COOLED CABLE CONDUCTORS FOR LARGE HIGH FIELD SUPERCONDUCTING MAGNETS. (1976), pp. 586-592 [abs].
  • Hoenig, MO; Iwasa, Y; Montgomery, DB; Bejan, A, SUPERCRITICAL HELIUM COOLED, CABLED, SUPERCONDUCTING HOLLOW CONDUCTORS FOR LARGE HIGH FIELD MAGNETS. (1976), pp. 310-313 [abs].
  • Bejan, A; Jr, JLS, HEAT EXCHANGERS FOR VAPOR-COOLED CONDUCTING SUPPORTS OF CRYOSTATS., Adv Cryog Eng, vol 21 (1975), pp. 247-256 [abs].
  • Bejan, A, Discrete cooling of low heat leak supports to 4.2 K, Cryogenics, vol 15 no. 5 (1975), pp. 290-292 [abs].
  • THULLEN, P; STECHER, R; BEJAN, A, FLOW INSTABILITIES IN GAS-COOLED CRYOGENIC CURRENT LEADS, IEEE Transactions on Magnetics, vol MA11 no. 2 (1975), pp. 573-575 [10.1109/TMAG.1975.1058600] [abs].
  • Thullen, P; Jr, RWS; Bejan, A, FLOW INSTABILITIES IN GAS-COOLED CRYOGENIC CURRENT LEADS., IEEE Transactions on Magnetics, vol MAG-11 no. 2 (1975), pp. 573-575 [abs].
  • Bejan, A; Jr, JLS, Thermodynamic optimization of mechanical supports for cryogenic apparatus, Cryogenics, vol 14 no. 3 (1974), pp. 158-163 [abs].
  • Bejan, A; Keim, TA; Jr, JLK; Jr, JLS; Thullen, P; Wilson, GL, SUPERCONDUCTING ALTERNATOR TEST RESULTS., Adv Cryog Eng, vol 1 (1974), pp. 53-58 [abs].
  • Bejan, A, Material selection for the torque tubes of large superconducting rotating machinery, Cryogenics, vol 14 no. 6 (1974), pp. 313-315 [abs].
  • Kang, DH; Lorente, S; Bejan, A, Constructal distribution of multi-layer insulation, International Journal of Energy Research [10.1002/er.1895] [abs].